MHE14XMD1 Roper Microwave - Instructions

All Instructions for the MHE14XMD1
106 - 120 of 145

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The microwave door would not stay latched, so it wouldn't come on.
2 of 12 people found this instruction helpful.
  • George from Maceo, KY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
The repair was easy, I just took off a few screws and found the broken latch spring. The real story is how easy it was to find the replacement spring from Partselect! I couldn't believe they had it, and even better yet, I ordered it one afternoon, and it came the next day with normal shipping! Unbelievable! Then I just popped it in and r eplaced the covers I had removed and it was working again!
Was this helpful?
Thank you for voting!
The glass tray in the microwave got chipped while i was washing it and started to crack.
  • Amber from Loretto, PA
  • Really Easy
  • Less than 15 mins
I just opened the box and set it in. Took all of two minutes.
Was this helpful?
Thank you for voting!
Burn't out bulb.
  • Carter from McCordsville, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed the glass cover and replaced the bulb. Very simple.
Was this helpful?
Thank you for voting!
time to change charcoal filter
  • James from Albany, MO
  • Easy
  • Less than 15 mins
  • Screw drivers
removed 2 screws, removed used filter, installed new filter,replaced 2 screws
Was this helpful?
Thank you for voting!
rotating glass dish assembly making stange noise
  • Lawrence from Excelsior, MN
  • Really Easy
  • Less than 15 mins
The lady in the Nova Scotia call center should get all the credit for being able to identify the part I needed from only the very limited information I was able to give her. Employee of the month for her. She also had such a great can do attitude. Lawence Baier
Was this helpful?
Thank you for voting!
Persistent odor after preparing microwave popcorn
  • Ralph from Maryville, TN
  • Really Easy
  • Less than 15 mins
After consulting owner's material for guidance on how to access the charcoal filter, I removed the front screen (two screws), removed and replaced the filter and replaced the front screen.
Was this helpful?
Thank you for voting!
Broke a 15 year old glass cooking tray
  • Stephanie from La Jolla, CA
  • Really Easy
  • Less than 15 mins
Ordered the item on a Monday at 12pm and it arrived the next day. Amazing!
Was this helpful?
Thank you for voting!
glass cooking tray droped and broken
  • janice from dunn, NC
  • Really Easy
  • Less than 15 mins
just replace need cooking tray
Was this helpful?
Thank you for voting!
Replacement
  • George from Statham, GA
  • Really Easy
  • Less than 15 mins
Easy, perfect
Was this helpful?
Thank you for voting!
grille kept falling off until tabs broke
  • Marcelene from Cuyahoga Falls, OH
  • Easy
  • Less than 15 mins
  • Screw drivers
Looked at the original instruction manual to see how it was installed, removed the two Phillips screws, fitted the grille into position until correct, then replaced the two screws.
Was this helpful?
Thank you for voting!
old vent grille brackets broke off
  • Andrea from Fresno, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Super easy! Just unscrewed remainder of the vent grille, saving the old screws as instructed on other reviews I read, and replaced vent grille with perfectly fitting new one...whole process took 15 min (while 9 months pregnant with a toddler hanging on my leg!) And partselect sent the piece with regular shipping in 2 days!
Was this helpful?
Thank you for voting!
burnt out light bulb
  • Shirley from Londonderry, NH
  • A Bit Difficult
  • Less than 15 mins
  • Screw drivers
The problem I have with changing the bulb is my microwave is an overhead one and therefore I cannot tip it on its side to easily replace the bulb. I have to drop the lid down and carefully install the new bulb from underneath.
Was this helpful?
Thank you for voting!
Part missing
  • Cheryl from Chula Vista, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
This rental unit was missing the vent grille for the mounted microwave. It was super simple to install and makes the microwave look like new.
Was this helpful?
Thank you for voting!
broken glass cooking tray for microwave
  • Vanessa from Atlanta, GA
  • Really Easy
  • Less than 15 mins
Twas really easy considering that all I had to do was place the plate back in the microwave. Easy Peasey
Was this helpful?
Thank you for voting!
broken glass microwave tray
  • Ronald from Rhinelander, WI
  • Really Easy
  • Less than 15 mins
Tray arrived in a short period of time and was a perfect match.
Was this helpful?
Thank you for voting!
All Instructions for the MHE14XMD1
106 - 120 of 145