My Orders
MHE14XMB1 Roper Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burned out light bulb which lit the surface of the range.
1 of 2 people
found this instruction helpful.
-
Michael J from LORAIN, OH
- Very Easy
- Less than 15 mins
-
Screw drivers
Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.
Was this helpful?
Thank you for voting!
Glass tray shattered
1 of 2 people
found this instruction helpful.
-
Mouang from Sacramento, CA
- Easy
- Less than 15 mins
Ordered the glass tray and installed it. Received the orderin about two days.
Was this helpful?
Thank you for voting!
"Lost" microwave tray
1 of 2 people
found this instruction helpful.
-
Amelia from Charleston, SC
- Really Easy
- Less than 15 mins
Took out the turntable parts to ensure I ordered the correct cooking tray. Matching those with photos of related parts on PartSelect worked great. Put turntable drive and support ring in place and cooking tray went in very easily. Plan to order a second one to have on hand for this rental property.
Was this helpful?
Thank you for voting!
cooking tray chipped
1 of 3 people
found this instruction helpful.
-
Nancy from Henderson, NV
- Really Easy
- Less than 15 mins
replaced with new one
Was this helpful?
Thank you for voting!
Glass tray missing and vent grille broken
1 of 3 people
found this instruction helpful.
-
Craig from Kalamazoo, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced the missing tray and unscrewed a couple of screws to remove broken grille tabs and retightened the screws to hold in the new grille. Very successful and very easy. Thanks
Other Parts Used:
Was this helpful?
Thank you for voting!
machine was dead.
3 of 9 people
found this instruction helpful.
-
Mark from Smithtown, NY
- A Bit Difficult
- 1- 2 hours
-
Pliers, Screw drivers
After removing the over-the-range unit (no small feat!) I had to figure out how to open the case (good puzzle!). Capacitor had already discharged, so it was very easy to reach in, pop the old fuse and install the new one! As per your advice, I found out I was a "28%-er"! Upon re-installation, the microwave "sprang to life"!! Thanks, "P
... Read more
art Select"!! I was already shopping around for a new machine! (Now if you could only tell me an easier way to re-mount this heavy beast over the stove!!!)
Read less
Was this helpful?
Thank you for voting!
The vent grille became lose and was falling off from the position each time we open the microwave.
0 of 1 people
found this instruction helpful.
-
Gloria from Middletown, DE
- Really Easy
- Less than 15 mins
First, I ordered the part.The part was sent to me within 2 days.Then,I removed the old one that was always falling off and mounted the new one. It was a perfect fit.
Was this helpful?
Thank you for voting!
microwave vent grill
0 of 1 people
found this instruction helpful.
-
WALLEN from Anchorage, AK
- Really Easy
- Less than 15 mins
-
Screw drivers
I have been doing repair on things on my own for years, I am a retired prevenative maintenace supervisor.
While cleaning the microwave vent grill from being old it fell apart, so I ordered the part using the internet to find the a company that has the same part, the part didnt take long before I recieved it. It didnt take five minute ... Read more s to install it, and it saved me cash in the pocket from someone else to do the work. wallen
While cleaning the microwave vent grill from being old it fell apart, so I ordered the part using the internet to find the a company that has the same part, the part didnt take long before I recieved it. It didnt take five minute ... Read more s to install it, and it saved me cash in the pocket from someone else to do the work. wallen
Read less
Was this helpful?
Thank you for voting!
broken
0 of 1 people
found this instruction helpful.
-
Donald from Pompano Beach, FL
- Really Easy
- Less than 15 mins
put the turntable in and had a Rum and Coke to celebrate. Your service was GREATTTTTT...
Was this helpful?
Thank you for voting!
plastic holders broke on our vent grille
0 of 1 people
found this instruction helpful.
-
kristen from poynette, WI
- Really Easy
- Less than 15 mins
-
Screw drivers
We took off the old grille - and simply screwed on the new one. Easy peasy.
Was this helpful?
Thank you for voting!
Grill was cracked (mounting tabs) some time ago by unknown source. Suggest during in warranty problem on fire hazard. Vent grill was falling off.
0 of 1 people
found this instruction helpful.
-
John from Mentor, OH
- Really Easy
- Less than 15 mins
-
Screw drivers
Unscrewed the remaining (2) screws that held the vent in place, placed the new grill in the tab loctators, and screwed it into place. Done...in less than 10 minutes. It took me 15 minutes to find my wife to show her what a nice job I did.
Was this helpful?
Thank you for voting!
part of grill plastic became crystalized and cracked
0 of 1 people
found this instruction helpful.
-
Judy from Albany, OR
- Really Easy
- Less than 15 mins
-
Screw drivers
First, the screws were removed that held the vent grill to take off grill. The new vent grill was then replaced in a very short time. No problems at all.
Was this helpful?
Thank you for voting!
Broken Vent Grill
0 of 1 people
found this instruction helpful.
-
STEPHEN from RICHMOND, VA
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the 2 screws holding the broken vent grill, placed the new one in place and put the 2 screws back in place. Took less than 5 minutes from opening package to replacing the grill.
Was this helpful?
Thank you for voting!
Old part broken
0 of 1 people
found this instruction helpful.
-
Steve from Foley, MN
- Easy
- Less than 15 mins
-
Screw drivers
Replaced vent with 2 screws. Very easy.
Was this helpful?
Thank you for voting!
Lightbulb burned out
1 of 4 people
found this instruction helpful.
-
Roland R from NORTH ANDOVER, MA
- Very Easy
- Less than 15 mins
-
Screw drivers
Removed one screw lowered glass cover removed burned out bulb replaced with new one put glass back reinstalled screw. Dune 5 minutes back in business
Was this helpful?
Thank you for voting!