MHE14XMB0 Roper Microwave - Instructions

Washed the glass tray and put in the microwave oven. Easy..

Turn off power supply at breaker . Replace old bulb with new bulb .

I was able to buy the mounting bracket for a very cheap price and was able to instill it in my kitchen with ease.
Thank you

screwed in new bulb

easy to replace, just the same as cleaning the turntable and placing back in the micorwave;

Unplug the microwave. Then remove the six screws that hold the lower panel which has the light bulb cover and a couple of vent filters. The light bulb sockets are on a fixture that is connected by a quick connect electrical connector. Disconnect that and the whole panel is free to access the bulbs. My bulbs were very fragile and trying to twist them out resulted in the glass twisitng loose with the base still in the sockets. I needed to use a needle nose pliers to remove the bases and then I replaced the bulbs and put every thing back together

Rep knew exactly what I needed when I described where the part should go on my microwave - price great - shipping great - installed in seconds. Thank you!

Spouse just screwed in the new bulb and reinstalled the light cover plate with the two screws. Took under a minute. Works great.

Husband replaced the bulb

Removed turntable
Place support ring in track
Place turntable on support ring.
Easy, peasy!

Replaced the supports and rack.

Placed Grill and tightened screws. It was trivial and the part was perfect.

I ordered another one and placed it inside the microwave. It works and fits perfectly. I received the order exactly as scheduled.

Simply removed two screws to remove the old vent grille and replaced it with the new grille. I was also very pleased with the assistance I received from the service rep. I had ordered the wrong grille. I called the PartSelect help number and the rep walked me through the product return process, then found the correct part and ordered it. I had the replace 3 - 4 days later. The rep was very polite and patient during the whole process.

Looked up the Whirlpool Co. and ordered the part. It was quite simple. Arrived in 2 days and I simply placed it in the microware. It was very very easy!

E. Robinson