- Home
- MH6150XMB0
- Instructions
MH6150XMB0 Whirlpool Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Tray got chipped on the corner
2 of 2 people
found this instruction helpful.
-
Mary Lee from LK FOREST PK, WA
- Very Easy
- Less than 15 mins
ordered a new tray
Was this helpful?
Thank you for voting!
Burned out light in microwave
4 of 8 people
found this instruction helpful.
-
DANNY from SAINT JOHNS, FL
- Very Easy
- Less than 15 mins
-
Screw drivers
Spouse just screwed in the new bulb and reinstalled the light cover plate with the two screws. Took under a minute. Works great.
Was this helpful?
Thank you for voting!
Light over range burned out
3 of 6 people
found this instruction helpful.
-
Vincent from CHICAGO, IL
- Very Easy
- Less than 15 mins
-
Screw drivers
Philips screwdriver
Removed screw (1)
Removed light bulb
Put in new light bulb
Closed door to bulb compartment
Returned screw.
Pro tip! Check how many bulbs you need before ordering. Mine only needed two. I got two. I suspect I’ll buy a new microwave before new bulb burns out again. Ordering/deliv ... Read more ery was fast. No need to have spare on hand.
Removed screw (1)
Removed light bulb
Put in new light bulb
Closed door to bulb compartment
Returned screw.
Pro tip! Check how many bulbs you need before ordering. Mine only needed two. I got two. I suspect I’ll buy a new microwave before new bulb burns out again. Ordering/deliv ... Read more ery was fast. No need to have spare on hand.
Read less
Was this helpful?
Thank you for voting!
No problem
2 of 3 people
found this instruction helpful.
-
Janet from PITTSFORD, NY
- Really Easy
- Less than 15 mins
-
Pliers
I had a son put in the new light bulbs. Rather simple
Was this helpful?
Thank you for voting!
Would not start
2 of 3 people
found this instruction helpful.
-
LENNARD from BURNSVILLE, MN
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Watched a you tube video prior to installing new switch. Followed the video which gave me confidence i was up to the task. After removing the touch pad I found my design was not exactly like the you tube model but I found the defective switch, replaced it and put the microwave back together. Works great. Again watch the videos
Was this helpful?
Thank you for voting!
Plastic latch to lock the microwave door broke.
6 of 15 people
found this instruction helpful.
-
Richard from Arlington, VA
- Really Easy
- Less than 15 mins
-
Screw drivers
Did an online search for repairs and found PartSelect. Simple to order the part and had it installed myself less than a week later. Thank you!!
Was this helpful?
Thank you for voting!
controls stopped working
1 person
found this instruction helpful.
-
dennis from racine, WI
- Really Easy
- 15 - 30 mins
-
Nutdriver
I removed 4 screws,pealed off old membrane and applied new one. I plugged in the 2 plugs and reinstalled the panal. It went well.I had ordered the wrong color and customer service was very good at taking care of the problem.I recommend them and will use them again.
Was this helpful?
Thank you for voting!
Microwave light, turntable, and heat were not working
1 person
found this instruction helpful.
-
John from PEORIA, AZ
- Difficult
- 30 - 60 mins
-
Pliers, Screw drivers
Remove from cabinetry, take cover off and had a very difficult time removing the plastic form that has the switched in. Replace the lowest of all the switches, and then again very difficult time getting the plastic form back in. Some of the plastic even broke during the process but not any that could prevent it from working as it did be
... Read more
fore. I had ordered a fuse, 2 packs of 2 switches as there are 3 switches but only had to use 1 to get it working again. Tested after switch install, put the cover back on and reinstalled in the cabinet.
Read less
Was this helpful?
Thank you for voting!
Burned out light bulb which lit the surface of the range.
1 of 2 people
found this instruction helpful.
-
Michael J from LORAIN, OH
- Very Easy
- Less than 15 mins
-
Screw drivers
Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.
Was this helpful?
Thank you for voting!
Filter needed replacement after food burn in oven. Odor awful.
1 of 2 people
found this instruction helpful.
-
Mrs Ruth V. from CHICKASHA, OK
- Very Easy
- Less than 15 mins
-
Screw drivers
After reading oven manual , used screwdriver to remove appropriate screws from behind vent. Slid vent out then cleaned vent with dish liquid. Removed old filter by simply sliding it out from easily accessed position. Inserted new filter. Replaced vent with screws. Could not have been easier, no more than fifteen minutes to complete job.Ve
... Read more
ry pleased to have received replacement filter in four days.
Read less
Was this helpful?
Thank you for voting!
One of the shelf plastic holder was broken
3 of 8 people
found this instruction helpful.
-
Craig from Swansea, MA
- Easy
- Less than 15 mins
-
Pliers
I was able to find the part on line and within a few days received the part and installed it with no problems thanks to the website drawing information.
Was this helpful?
Thank you for voting!
Too Big Didn' Fix
0 of 1 people
found this instruction helpful.
-
BRIGIDA from GAINESVILLE, VA
- Really Easy
- Less than 15 mins
I received my glass cooking tray so fast but when I try to put in the microwave did't fix was to big,I call you today to return and very nice lady help me and told me I need to call whirlpool and explain them and already order again thank so much for all your help you have very nice people in customer service. Thank you so much
... Read more
again. !!
Read less
Was this helpful?
Thank you for voting!
Microwave would not cook
0 of 1 people
found this instruction helpful.
-
Scott from Mickleton, NJ
- Easy
- Less than 15 mins
-
Screw drivers
All the electrics worked on Amana microwave EXCEPT for the cooking function. Inspected the control board and found the upper switch on the door interlock was burnt. Installed new switch in minutes and everything now works fine. Unfortunately, had to purchase expensive two switch "kit" although only one switch was kaput. PartsSelect mai
... Read more
ling was SUPER fast. Thanks for looking, Scott
Read less
Was this helpful?
Thank you for voting!
microwave plate broke
0 of 1 people
found this instruction helpful.
-
Cassandra from Cleveland, OH
- Really Easy
- Less than 15 mins
Just took the plate out the packaging & rinsed,dried and put in the oven. I was so happy I found it @partselect online& it came in the next day or two. Will definitely use them again. It was a fraction of the cost from local parts store.
Was this helpful?
Thank you for voting!
broken
0 of 1 people
found this instruction helpful.
-
John from Knoxville, TN
- Really Easy
- Less than 15 mins
Placed in micro Great sevice. Thanks
Was this helpful?
Thank you for voting!