MH3184XPS6 Whirlpool Microwave - Instructions

Turn off power supply at breaker . Replace old bulb with new bulb .

It really just snaps into place- nothing to it.
The only small problem is, it's a different color than the original. The original was gray and the new one is black but it still looks fine.

Thanksgiving night, I found a rather large crack in the grille and it wouldn't stay in place. I placed the order for the replacement grille on Friday and received the new grille Monday. It just snapped in place, no tools necessary. I had contacted the Sears parts replacement department and all I got was attitude from the parts "help" desk. I'm glad I placed the order with Parts Select, the cost was cheaper and shipping was faster. I won't hesitate to use Parts Select the next time I need a part for any of my Whirlpool appliances.

I removed the broken tray and ring-turn and replaced it with the new
Service was fantastic, parts were ordered one day and received the next

Ordered new part on Thursday night and new part arrived the following Monday. After unpacking I just snapped the new grille in place and the job was done. I was really impressed with the quick service that I received from PartSelect.

Spouse just screwed in the new bulb and reinstalled the light cover plate with the two screws. Took under a minute. Works great.

Rep knew exactly what I needed when I described where the part should go on my microwave - price great - shipping great - installed in seconds. Thank you!

With new replacement grill, a separate clip was supplied in the box that had to be screwed in to the top portion. This clip did not fit since the hole for the screw was on the right side and not the left, so I just snapped the grill in place with the existing clips.
There must be another clip that fits this unit but perhaps the person packing the box grabbed the wrong clip and taped it in with the shipped box.

Husband replaced the bulb

Replaced the supports and rack.

I ordered another one and placed it inside the microwave. It works and fits perfectly. I received the order exactly as scheduled.

Removed turntable
Place support ring in track
Place turntable on support ring.
Easy, peasy!

Unplug the microwave. Then remove the six screws that hold the lower panel which has the light bulb cover and a couple of vent filters. The light bulb sockets are on a fixture that is connected by a quick connect electrical connector. Disconnect that and the whole panel is free to access the bulbs. My bulbs were very fragile and trying to twist them out resulted in the glass twisitng loose with the base still in the sockets. I needed to use a needle nose pliers to remove the bases and then I replaced the bulbs and put every thing back together

Looked up the Whirlpool Co. and ordered the part. It was quite simple. Arrived in 2 days and I simply placed it in the microware. It was very very easy!

E. Robinson

Unpacked the replacement and popped it into place.