MH3184XPS2 Whirlpool Microwave - Instructions

Spouse just screwed in the new bulb and reinstalled the light cover plate with the two screws. Took under a minute. Works great.

With new replacement grill, a separate clip was supplied in the box that had to be screwed in to the top portion. This clip did not fit since the hole for the screw was on the right side and not the left, so I just snapped the grill in place with the existing clips.
There must be another clip that fits this unit but perhaps the person packing the box grabbed the wrong clip and taped it in with the shipped box.

Unplug the microwave. Then remove the six screws that hold the lower panel which has the light bulb cover and a couple of vent filters. The light bulb sockets are on a fixture that is connected by a quick connect electrical connector. Disconnect that and the whole panel is free to access the bulbs. My bulbs were very fragile and trying to twist them out resulted in the glass twisitng loose with the base still in the sockets. I needed to use a needle nose pliers to remove the bases and then I replaced the bulbs and put every thing back together

Removed turntable
Place support ring in track
Place turntable on support ring.
Easy, peasy!

Husband replaced the bulb

Replaced the supports and rack.

I ordered another one and placed it inside the microwave. It works and fits perfectly. I received the order exactly as scheduled.

I called my brother, he is much more proficient with reading instructions and figuring out how they go together,! He had it done in less than 30 mins.! I love my brother!!!

If you buy a used microwave, be sure the mounting plate is with it. Buying one is always more than $25 bucks and takes time.

Looked up the Whirlpool Co. and ordered the part. It was quite simple. Arrived in 2 days and I simply placed it in the microware. It was very very easy!

E. Robinson

Opened door and put new plate in.

Placed order on Thursday evening and received Sat Am

Took out turntable and swapped out old one with a new bright and shiny
New one, ring that is. It was easy using the part from parts select
Thanks
Paul

Snaped new grill into place

snapped new grill in place

Very simple just fit in the groves and snaped it in. I had ordered 1 from another Compaany that would not fit and was almost twice the price, got my money back but had to pay shipping Will use partSelect.com for any other parts.