MDB8959SFZ4 Maytag Dishwasher - Parts

This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to mak...Read moree sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.

The door balance kit helps support the dishwasher door. This kit includes 2 door balance links and 2 door balance mounts with wheels.

Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.

This slide rail is for use on the left-hand side. The dishrack slide rail supports the dishrack as it slides in and out from the dishwasher.

This slide rail is for use on the right-hand side. The dishrack slide rail supports the dishrack as it slides in and out from the dishwasher.

This drain pump is used in dishwashers to remove water from the dishwasher tub. If the impeller in the dishwasher is damaged or the motor has been shorted out and will not drain, it is possible the body is cracked, causing leakage. To prevent this from happening, replace the drain pump. The tools needed for this installation are: Phillips...Read more screwdriver, 5/16 inch nut driver, 5/8 inch wrench, and a flathead screwdriver. Remember to unplug your dishwasher from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for further installation instructions.

Prevent leaks and maintain optimal cleaning performance with this durable dishwasher door seal. It creates a secure barrier to keep water contained during wash cycles, ensuring reliable operation. Replace by removing the old seal and fitting the new one snugly around the door frame.

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

This dishwasher heating element is a genuine replacement component designed for select models from Whirlpool, KitchenAid, Maytag, Kenmore, and affiliated brands. Constructed from a durable nickel-chromium alloy, it efficiently heats water during the wash cycle and provides the necessary heat to dry dishes at the end of the cycle. A malfun...Read morectioning heating element may result in poor cleaning performance, wet dishes, insufficient water temperature, or failure to start. In some cases, blinking control panel lights may indicate a heating issue. Replacing this part can restore optimal functionality and improve overall appliance efficiency. Compatibility should be confirmed using your dishwasher’s model number prior to installation.

This drain hose is 6 and 1/2 feet.

This water inlet valve controls the flow of water into your dishwasher, ensuring each cycle begins with the correct amount of water. If your appliance is leaking, overfilling, or not filling at all, a faulty valve may be the cause. Designed for compatibility with a variety of models, this replacement part helps restore efficient and relia...Read moreble operation. To ensure a proper fit, always confirm your dishwasher’s model number before ordering. For safety, disconnect the appliance from its power source and wear protective gloves before installation.

This door latch is designed to secure the dishwasher door and signal the control board when the door is properly closed. If your dishwasher won’t latch or start, the latch may be faulty and should be replaced. Compatible with various models, this part is sold individually and does not include mounting hardware. Installation requires a scr...Read moreewdriver or drill and a set of pliers. Always disconnect power before beginning the repair.