MDB4000AWB Maytag Dishwasher - Parts

This part has been redesigned by the manufacturer and is now a complete full basket with a handle and covers.

This lower dishrack roller is less than two inches in diameter. It is made entirely of plastic.

This door gasket can be installed by simply pressing it into the channel around the door. This dishwasher door gasket, or door seal, allows the dishwasher door to have an airtight seal when closing the door. No tools are required for this installation, simply remove the existing gasket and press the replacement gasket into the channel aro...Read moreund the door. It is recommended to clean the channel while the gasket is removed. This part may need to be replaced if the existing one is cracked, broken, or hardened, possibly causing water to leak through the door while it is running. This part is sold individually, and is sourced from the original manufacturer.

This dishrack clip is intended for use with dishwasher dishracks that have adjustable pegs. This clip is only about four inches long.

This dishrack guide rail stop is made of plastic and is gray in color. It is an inch and a half long.

This upper dishwasher dishrack roller is just over an inch in diameter. It is all white in color and is made entirely of plastic.

This part provides more flexibility for the door spring.

This inner door insulation seal is almost twenty-four inches long. It is gray in color and is made of a foam material.

This water inlet valve is specially designed for those dishwashers of the vertical axis style and comes with a mounting bracket. The attaching solenoids on the valve open and close according to the desired amount of water needed.

This part senses when the door is closed so the cycle can start.

Sold Individually. White in color.

This door spring is sold individually and is located on either side of the door. NOTE: The part may not be the same size as the original, and may differ in appearance, but will function the same.