MAH21PNDGW Maytag Washer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Inner door panel had a hole in it
Ordered a new inner panel and had my son in-law put it in for me. He is a mechanic so it was a quick an easy fix.
Parts Used:
-
Gloria from Prairie City, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Syphon cup had crack in it and had to be replaced
-
Tom from Phoenix, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Loud noise when in spin cycle
I was sick when I heard the noise from our washer. I looked online at new ones and found out it was going to cost between $1000 to $1500 to replace it. While looking online I found the PartSelect site. Unbelievable! I put in the model #, read the posts, ordered the parts and within a few days they were in. Using the video and the posted instructions I took it apart and replaced the bearings and seals. The whole thing took about 3 hours and we were back to washing clothes. Total repair costs were about $160 to $180. Compared to the price of a new washer, you guys saved the day.
Parts Used:
-
Scott from Curtis, NE
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Inside door for washer rubbed hole in
removed screws holding inside panel switched clips and reset and replaced screws in outer door panel. Now works with no leaks
Parts Used:
-
Sonia from Granite Falls, WA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Plastic worn through from years of jeans and tennis shoes
First thing I did was watch the video the parts company provided. It was concise and kept me from calling the appliance repair man to come right out. It looked easy enough for this 60 plus year old woman to accomplish. The steps they showed were right on. The only part I would emphasize is the rubber grommet can be installed upside down. If it is the air circulator will not fit in. Left me scratching my head for a minute or two. Once that was in the right way it was a done deal. If I had put that in right the first time the replacement would have taken half the time. What a great company!
Parts Used:
-
Leigh from Granbury, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Machine shook violently durring spin cycle
I referenced the enclosed instructions, and U tube videos, along with gasket I also changed the bearings for about $40. From local grainger, it seems to have solved problem, thanks for quick shipping,
Parts Used:
-
victor from el paso, TX
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!
We had a leak in the tub pump hose
It was very easy...we ordered the part and it only took a day and a half and it was here.
Parts Used:
-
Sandra from Slinger, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Socket set
Was this instruction helpful to you?
Thank you for voting!