Models > MAH21PDDWQ > Instructions

MAH21PDDWQ Maytag Washer - Instructions

All Instructions for the MAH21PDDWQ
106 - 111 of 111
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Inside door for washer rubbed hole in
removed screws holding inside panel switched clips and reset and replaced screws in outer door panel. Now works with no leaks
Parts Used:
Inner Door - white
  • Sonia from Granite Falls, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Plastic worn through from years of jeans and tennis shoes
First thing I did was watch the video the parts company provided. It was concise and kept me from calling the appliance repair man to come right out. It looked easy enough for this 60 plus year old woman to accomplish. The steps they showed were right on. The only part I would emphasize is the rubber grommet can be installed upside down. If it is the air circulator will not fit in. Left me scratching my head for a minute or two. Once that was in the right way it was a done deal. If I had put that in right the first time the replacement would have taken half the time. What a great company!
Parts Used:
Inner Door - white
  • Leigh from Granbury, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Machine shook violently durring spin cycle
I referenced the enclosed instructions, and U tube videos, along with gasket I also changed the bearings for about $40. From local grainger, it seems to have solved problem, thanks for quick shipping,
Parts Used:
Lip Seal Kit
  • victor from el paso, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Water didn't completely drain from tub.
Purchased the pump from parts select. Maytag wanted 250.00 for the pump!. Followed previous instructions from this site and had no problems. Washer still does not fully drain. Believe the problem is the filter. Maytag either couldnot/would not tell me me where to replace the filter. There is a spare filter taped to the inside of the washer. Maybe it fits inside the tub, above the outlet tube leading to the pump. Will check and see at a later date, unless I see a response on the website. Thanks.
Parts Used:
Drain Pump - 120V 60Hz
  • mark from las Vegas, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
We had a leak in the tub pump hose
It was very easy...we ordered the part and it only took a day and a half and it was here.
Parts Used:
Tub to Pump Hose
  • Sandra from Slinger, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
Was this instruction helpful to you?
Thank you for voting!
The washer would not drain
The repair was very easy after watching the video that was with the part. I will continue to use this site for other repairs that need to be done.
Parts Used:
Drain Pump - 120V 60Hz
  • Donna from Vashon, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MAH21PDDWQ
106 - 111 of 111
Back to Top