LUDP8908SN (ASTEEUS) LG Dishwasher - Parts

This gray mounting bracket is designed to securely hold the dish rack in place inside your dishwasher during operation. Measuring 1 inch by 1 inch, it ensures stability and helps prevent the rack from shifting or causing internal damage. If the holder becomes broken or goes missing, replacing it is essential to maintain proper rack alignm...Read moreent. Each bracket is sold individually and installs easily by snapping into the designated slot.

The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for mor...Read moree security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.

If your dishwasher is leaking or not cleaning as well as it used to, the door gasket might be the culprit. This flexible rubber seal fits around the tub and keeps water and steam inside during each cycle. It’s tough enough to handle heat and wear, and replacing it can fix common problems like water on the floor or poor wash results. Insta...Read morellation is simple—just press it into the groove around the door and you’re good to go.

This drain hose assembly is designed for use with select LG washing machines and includes both the flexible rubber hose and plastic connectors. It efficiently channels used water from the washer tub to a designated drainage system, such as a standpipe or laundry sink. Over time, the hose may become clogged, dislodged, or damaged by foreig...Read moren objects or external impact. Signs of a faulty hose include standing water in the tub, leaks, mold growth, or overflow. Prompt replacement is recommended to maintain proper washer performance. Installation requires only basic tools and should be done with the appliance powered off.

This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your dishwasher continues to fill after it is full, or if it fills slow...Read morely, you may need to replace this valve. Another indication that your valve is damaged and will need to be replaced, is if you notice it is leaking when the dishwasher fills up. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually and is an authentic OEM part.

This genuine OEM Control Panel Assembly fits select LG dishwashers, housing the buttons and display for managing cycles. Verify compatibility and unplug the appliance before installation.

This pump casing assembly is designed for use in select LG dishwasher models and houses several key components responsible for water circulation during wash and drain cycles. It includes the motor, which powers water movement; the impeller, which directs water through the spray arms; seals to prevent leaks; and both inlet and outlet ports...Read more that manage water flow into and out of the tub. The outer housing keeps all parts securely contained. If any part of this assembly fails, you may notice poor drainage, ineffective cleaning, or unusual grinding and buzzing noises. Replacing the entire assembly helps restore proper water circulation and overall dishwasher performance.