LSQ9010LG1 Whirlpool Washer - Parts

This is a replacement suspension spring retainer for your washer. The retainer holds the suspension spring in place while the washer is operating. If you notice movement, or an unusual noise or shaking of your washer when it is in use, it could mean that the suspension spring has been disconnected because of a broken or missing spring ret...Read moreainer. You will find the suspension spring retainer at the bottom of the tub assembly. To replace the retainer, use a pair of pliers to disconnect the suspension spring from the chassis mount to relieve the tension. Then, remove the spring from the retaining clip, and remove the retaining clip from the bottom of the washer. Attach the new retaining clip to the bottom of the washer, reattach the spring, and stretch it slightly so it can connect to the chassis. This part is sold individually.

This is a pack of three suspension pads for your washer. The suspension pads in your washer are found underneath the tub and prevent the rotating metal parts from grinding on one another. If your suspension pads are worn out, you will likely hear metal-on-metal grinding, which is an indication they need to be replaced. It is recommended to replace all three suspension pads at the same time.

This is used in your direct drive washer that has a neutral drain.

This hose clamp is sold individually.

Sold Individually.

This kit comes with the clamps.

This clutch band and lining kit helps control the washer's spin cycle by regulating the transfer of power between the drive system and the wash basket. It allows the basket to gradually reach full spin speed, helping remove excess water from clothing at the end of the cycle. If the washer is spinning slowly, leaving clothes wet, making un...Read moreusual noises, vibrating excessively, or not spinning at all, a worn clutch may be the cause. Replacing the clutch components with this kit can help restore proper spin performance, improve water extraction, and keep the washer operating efficiently. The kit includes the key parts needed to repair the clutch assembly and restore reliable operation.

Sold individually.

This screw is sold individually.

This insert is sold individually. Knob not included. Knob is sold separately.

This seal is for the top of basket drive tube shaft.

This drum assembly is designed for appliances that use a direct-drive motor system, eliminating the need for belts or gearboxes. By connecting the drum directly to the motor, this configuration enhances energy efficiency and reduces operational noise. The assembly provides stable rotation for effective washing or drying performance, depen...Read moreding on the appliance type. It is a genuine OEM component, ensuring compatibility and durability. Please note that the cardboard packaging or insert is not included with this part. Always disconnect power before installation and consult your appliance’s manual for proper handling and fit.