1. Home
  2. LSC27910SB
  3. Instructions

LSC27910SB (AWB2LGA) LG Refrigerator - Instructions

All Instructions for the LSC27910SB
16 - 23 of 23

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Recommended change interval for water filter.
2 of 11 people found this instruction helpful.
  • Willard from COMPTON, CA
  • Really Easy
  • Less than 15 mins
Remove top shelf. Screw out old filter and install new.
Was this helpful?
Thank you for voting!
replace hand screw
2 of 11 people found this instruction helpful.
  • dorothy from SALISBURY, MD
  • Very Easy
  • Less than 15 mins
  • Screw drivers
unfortunately my fridge stopped working. I purchased another but wanted to try and repair the old one. when ew one arrived, the old one was supposed to be put in garage but instead was hauled away. Had delivery return next day but they had as already removed and lost the handle screw for the bottom freezer and the screw that holds handle in place. ordered the handle screw and picked up the nut. very simple to install the screw and put handle back on.
Read less
Was this helpful?
Thank you for voting!
Ice tray was bent and spilling water onto ice making it freeze
  • William from Nolensville, TN
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I took the ice out with one screw and took out the old tray the new one slipped right in and I hooked up the little heat strip with one snap works perfect cost $10 I was told by appliance repair tech that I needed to replace the ice maker for $450 saved $440 dollars replacing the bent or warped ice tray
Was this helpful?
Thank you for voting!
Each time we've had to move we have to remove the doors from the fridge to get it thru the front door.since water and ice run thru the freezer door there are 2 tubes that connect at the bottom of the freezer door that aren't meant to be separated very often if ever.it's easier to cut the tubing on b
  • Sarah from Elk Grove, CA
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers
With alot of elbow grease and a pair of pliars we managed to get the old connector off wo cuttig the tubing as the tubing was getting to short from being cut once to many times & there was no more play in the length.Original connector was a different color and shapped slightly different than the new one so was a bit concerned that I had ordered the wrong part but it went one very easily & did not leak. We even managed to remove it again just to see if it was possible wo cutting again. it came off with no trouble.I would say the replacement part was a better fit than the original simply because we could remove it easily wo having to cut the tube!
Read less
Was this helpful?
Thank you for voting!
Bad fan motor and fan support assembly
  • Darryl from Rowlett, TX
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
The fan motor is easy to replace after the lower cover on the back of the refrigerator is removed. There is a drain tube (1 screw) that has to be removed in order for the fan support to be removed.
Was this helpful?
Thank you for voting!
Threads were striped on water valve leaked needed new one
  • Nicholas from Melborne, FL
  • Easy
  • 30 - 60 mins
  • Screw drivers, Wrench set
Shut water valve off drained water in refrigerator instAlled new valve
Was this helpful?
Thank you for voting!
interior lights stay on
  • Rich from Pequannock, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Changed door switch. Repair worked for a few days but re-occured. Possibly the other switch is bad .
Was this helpful?
Thank you for voting!
My ice maker overflowed water and made a mess in the freezer
  • steve from clarence center, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The part was extremely easy to replace. The unit came out with one screw, and I had to unplug the wire connection. After removing I noticed the ice tray was cracked - that's what caused the problem. The new unit went in easily with 1 plug in connection and 1 screw. I was done in less than 10 minutes.
Was this helpful?
Thank you for voting!
All Instructions for the LSC27910SB
16 - 23 of 23