1. Home
  2. LRFWS2906D
  3. Instructions

LRFWS2906D LG Refrigerator - Instructions

All Instructions for the LRFWS2906D
16 - 26 of 26

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Spring broke on Mullion
2 of 3 people found this instruction helpful.
  • Michael from MONTGOMERY, AL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Watched the video. Took the screws out, unplugged the connection and slid mullion off. Then plugged the new one in, slid it on and attached the two screws.
Was this helpful?
Thank you for voting!
Broken spring on flapper door
1 person found this instruction helpful.
  • Richard from IMPERIAL, CA
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Unplugged the frig and removed two phillip screws on flapper door of left door... Unplugged the electrical connector and removed flapper...
Picked up new flapper and snapped electrical contractor together... Slid new flapper bar into place and inserted two phillip screws... Job complete in 15 minutes...
Was this helpful?
Thank you for voting!
The spring on the mullion was broken so the mullion would not open to seal the other door.
1 person found this instruction helpful.
  • JANET from GRAND JCT, CO
  • Very Easy
  • Less than 15 mins
  • Screw drivers
I am a73 year old woman. If I can do this, anyone can. Super easy. Just watch the online video.
Was this helpful?
Thank you for voting!
Removed old part.
1 person found this instruction helpful.
  • Steve from NORTH AURORA, IL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Installed new one.
Was this helpful?
Thank you for voting!
Door Stopper had snapped off
1 person found this instruction helpful.
  • Lawrence from FALL RIVER, MA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Unscrewed what remained from broken door stop, aligned new one, screwed it in. Done!
Was this helpful?
Thank you for voting!
Spring in the plate front assembly broke. Door plate assembly would not move into correct position, preventing door from closing.
1 person found this instruction helpful.
  • Robert from WARREN, RI
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Followed Youtube video provided on the PartsSelect Website:

https://www.partselect.com/PS12374439-LG-AGU75188619-PLATE-ASSEMBLY-FRONT.htm?Inventory=12374439&SourceCode=20&SearchTerm=LFX28979ST

Made installation of the new part a piece of cake. Easy peasy!! Took less than 10 minutes.
Was this helpful?
Thank you for voting!
Spring broken in door mullion
1 person found this instruction helpful.
  • Wayde from SEMINOLE, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Took 2 screws out and disconnect wire and install new part.
Was this helpful?
Thank you for voting!
Old part did not seal properly
1 person found this instruction helpful.
  • Donald from MERRITT IS, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Read the reviews from other members and just did as they said. Needed a screw driver and the info from past persons review couldn’t have been easier.
Was this helpful?
Thank you for voting!
cannot get water to the icemaker
1 of 2 people found this instruction helpful.
  • PAUL from AMARILLO, TX
  • Very Difficult
  • More than 2 hours
  • Nutdriver
i changed the filter and was able to get water to the white coil at the bottom of the dispenser (left door) but could never get water to the icemalker.i also replaced the pump at the bottom of the door as well as the green ebr699172 dispenser electrical board.still can not get water to the icemaker.any help will be greatly appreciated.< br />paul
Read less
Was this helpful?
Thank you for voting!
replace hand screw
2 of 11 people found this instruction helpful.
  • dorothy from SALISBURY, MD
  • Very Easy
  • Less than 15 mins
  • Screw drivers
unfortunately my fridge stopped working. I purchased another but wanted to try and repair the old one. when ew one arrived, the old one was supposed to be put in garage but instead was hauled away. Had delivery return next day but they had as already removed and lost the handle screw for the bottom freezer and the screw that holds handle in place. ordered the handle screw and picked up the nut. very simple to install the screw and put handle back on.
Read less
Was this helpful?
Thank you for voting!
Water/ice maker not working
9 of 38 people found this instruction helpful.
  • Brent from ROGERS, MN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Remove push plate for water/ice maker switch, remove 2 screws and 2 wires for switch. Replace with new.
Was this helpful?
Thank you for voting!
All Instructions for the LRFWS2906D
16 - 26 of 26