LMC1575BD (CB5ELNA) LG Microwave - Instructions

All Instructions for the LMC1575BD
1 - 3 of 3

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sparks from an old wave guide that needed to be replaced
5 of 6 people found this instruction helpful.
  • Ellen from REDDING, CA
  • Easy
  • 15 - 30 mins
Put microwave on its side as my hands weren’t ready enough to hold it up while trying to push it in.
Put board on the door to hold it open.
Gently pushed the wave guide back as far as it would go. Then, I carefully pushed the front tabs in place. No bending. I had practiced on the old one first. Broke the 2 old tabs by pushing back to hard so you need to be careful.
Was this helpful?
Thank you for voting!
The new part was too thick for the worn out plastic ring which is obsolete.
1 person found this instruction helpful.
  • James from PURCELLVILLE, VA
  • A Bit Difficult
  • 30 - 60 mins
Needed to raise the part to match the ring. I used peanut butter to hold plastic shim while replacing to hold it in place. Built in Oct. 2009.
Was this helpful?
Thank you for voting!
Shaft socket was worn out
0 of 1 people found this instruction helpful.
  • Cesar from Miami, FL
  • Really Easy
  • Less than 15 mins
Pop old one out and replaced it with new one.
Was this helpful?
Thank you for voting!
All Instructions for the LMC1575BD
1 - 3 of 3