All Installation Instructions for LG Refrigerator LFX33975ST

The shelf on our refrigerator was cracked so I ordered a replacement.

Some have said that the installation took 5 minutes. Mine took less than that, and I did it with one hand. I had a beer in my other hand.

Parts Used:

Door Bin

Scott from KENT, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Replaced hose and it was exactly what I needed.

Replaced old hose and installed the new one. Was very simple with the instructions in your email..... step by step, could not of been any similar.... you guys rock

Parts Used:

Plastic Tube - 5/16 Inch

Donald from CLEBURNE, TX
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Broken Door Basket

Un-wrapped the basket......Installed with NO tools......

Parts Used:

Door Bin

Theodore from SACRAMENTO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Door basket broke

Opened the box. Removed wrapping. Washed the new part. Unloaded old basket. Removed old basket. Set in new basket. Loaded new basket. Closed the door. Even an 80 year old can do it!

Parts Used:

Door Bin

FONDA from KATY, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Freezer door gasket formed gaps between door and refrigerator.

Removed old gasket from the door and replaced with new gasket.

Parts Used:

Freezer Door Gasket

Cheryl from Ormond Beach, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

The overlay control Panay was broken at the bottom

We pryed the ice dispenser housing out unscrewed the overlay from the relay board and then reversed the process to put it back in time consuming but went slow as not to brake tabs or crack housing

Parts Used:

CASE ASSEMBLY,PCB

Daniel from JACKSONVILLE, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

The Ice maker stopped working

Thanks to videos on You-Tube which showed step by step removal and replacement. It was a simple process. only thing missing on the video was information on the green ground wire.

Parts Used:

Ice Maker Assembly - 3 Wire

Joseph from SAINT LOUIS, MO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Plastic bracket holding freezer drawer broke off

Removed upper drawer/basket from freezer

Removed 2 Philips screws

Removed rail bracket assembly

Reinstalled reversing those steps

Works like new.
Happy wife. Happy life. FYI- I am nearly 77 yrs young.

Parts Used:

Rail Connector

Terry from Broken Arrow, OK
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Large basket inside right door was broken.

Removed the old one and replaced with the new.

Parts Used:

Door Bin

Steve from DENHAM SPGS, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Freezer door gasket needed replacing.

Simply removed old gasket. Started in a corner with installing the new gasket. It went in easily and quickly.

Parts Used:

Freezer Door Gasket

Stephen from DICKINSON, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

1 person found this instruction helpful.

Was this instruction helpful to you?

The hose that feeds the Ice Maker broke,right where it goes in the Fridge.

I actually didn't use what I got. Because there was all kinds of tubing coiled up in the door. We just fed the exsess all the way through the Fridge,and Bingo! It was done.

Parts Used:

Filter Assembly

Refrigerator Water Filter LT700P

William from BOWDOINHAM, ME
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

In Door Ice Bin with built-in ice dispenser drive wheel gear broke when dispensing the ice.

I replaced the whole self-contained unit. I removed the old ice bin simply by lifting it out of the door and replacing it with a new one directly under the ice maker. It was a simple fix; no tools or service tech were required.

Parts Used:

ICE BUCKET

Steven J from Phoenix, AZ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

old gasket was damaged

i removed old and installed new gasket in 5 minutes. i watched a video. it was super easy .

Parts Used:

Freezer Door Gasket

Maria from TEQUESTA, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Ice buildup in corner of freezer.

Reviewed instructions on YouTube. Removed storage box.Removed Philips head screw on either side of track. Lifted door and placed it on table. Using a flat blade screwdriver removed old gasket (it did not looked damaged). Pressed new gasket into groove in door. Replaced door onto track and replaced screws. Replaced storage box. No more ice buildup.

Parts Used:

Freezer Door Gasket