My Orders
- Home
- LDCS24223S
- Instructions
LDCS24223S LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light doesn’t come on when fridge door opens
4 of 6 people
found this instruction helpful.
-
Lloyd G from QUEENS VLG, NY
- Really Easy
- 15 - 30 mins
Pulled fridge away from wall, unplug electrical connection, open fridge door, use knife to prize out door switch, pull off and replace switch from electrical wiring.
Was this helpful?
Thank you for voting!
interior light switch did not turn off light in ref
4 of 6 people
found this instruction helpful.
-
Timothy from SUSANVILLE, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
pried out old switch, disconnected wires ,placed wires on new switch
Was this helpful?
Thank you for voting!
Door switch would not turn on interior refrigerator light.
3 of 4 people
found this instruction helpful.
-
Jane from SHORELINE, WA
- Very Easy
- Less than 15 mins
I had previously watched a YouTube video (do this first!!) on a similar Kenmore model so I knew what to look out for: (1) turned off power, (2) took thin putty knife to slip under outer lip of switch (most screwdrivers are too thick), (3) wiggled switch at front end to release the tab, (4) unplugged from the socket, (5) plugged in new sw
... Read more
itch, (6) popped new switch back into door, (7) turned on power. Voila !! Super easy. I couldn't believe it.
Read less
Was this helpful?
Thank you for voting!
Blower motor out on condenser
4 of 7 people
found this instruction helpful.
-
George from WHITE BIRD, ID
- Easy
- 30 - 60 mins
-
Screw drivers
followed detailed movie from Utube video
Was this helpful?
Thank you for voting!
ice maker stopped working
3 of 5 people
found this instruction helpful.
-
SUREN from SAN RAMON, CA
- Easy
- 30 - 60 mins
-
Screw drivers
replaced the ice maker with the new assembly kit, the longest time taken was to fit back the pull out door .. had to align the slots correctly and check that it slid back and forth easily.
Was this helpful?
Thank you for voting!
Freezer frost accumulation
3 of 5 people
found this instruction helpful.
-
Peter from Sewell, NJ
- Easy
- 30 - 60 mins
-
Screw drivers
After noting frost in freezer Right rail started to jam. Noted freezer door was closing crooked. Rail replacement resolved issue. It had been frosting up for some time so Rail must have been broken for a while. Check door seals they were not closing flush.
Was this helpful?
Thank you for voting!
light didn't come on when the door was opened
2 of 2 people
found this instruction helpful.
-
William L from SUMAS, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
I took a very thin bladed screwdriver and took the old part out -carefully.
The new part fit in quite easily.
The new part fit in quite easily.
Was this helpful?
Thank you for voting!
Decor was broken
2 of 2 people
found this instruction helpful.
-
Maryann from Omaha, NE
- A Bit Difficult
- Less than 15 mins
Removed the tray and snapped the new piece into place, reinstall tray and done
Was this helpful?
Thank you for voting!
Switch stops working
2 of 2 people
found this instruction helpful.
-
David from PENNSVILLE, NJ
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
Replace with new switch. this is the third switch i have replaced in 10 years. the only part, besides a light bulb, that has gone bad. obviously this is a problem with this model for Kenmore, or just poor switch design.
Was this helpful?
Thank you for voting!
Light switch for refrigerator not functioning
2 of 3 people
found this instruction helpful.
-
shirley from ONALASKA, WI
- Easy
- 30 - 60 mins
-
Screw drivers
Followed instructions online
Was this helpful?
Thank you for voting!
roller was missing in freezer upper drawer
1 person
found this instruction helpful.
-
Bob from LIBERTY TWP, OH
- Really Easy
- Less than 15 mins
easy, just lift the drawer and insert the roller assy.
Was this helpful?
Thank you for voting!
door slight switch failed
1 person
found this instruction helpful.
-
Greg from CASA GRANDE, AZ
- Really Easy
- Less than 15 mins
-
Pliers
Covered the sidewall with tape to protect. Pried the switch out with knife blade and removed electric plug with needle nose pliers. placed plug in new switch and pushed switch into the hole in the side wall. Took about five minutes.
Was this helpful?
Thank you for voting!
Basket on door broke
1 person
found this instruction helpful.
-
PATRICIA from COHOES, NY
- Really Easy
- Less than 15 mins
Ordered new basket. Slid new basket on.
Was this helpful?
Thank you for voting!
Door light switch, 3rd one I have replaced in 6 years made in China.
1 person
found this instruction helpful.
-
Charles from CURWENSVILLE, PA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Easy install, small screwdriver under back of old switch push out and pull out with small pliers. unsnap the old plug and install new. YOUR DONE
Was this helpful?
Thank you for voting!
Replace switch
1 person
found this instruction helpful.
-
Dean from HILLSDALE, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Read previous tips
Taped off area around switch to protect surface
Used putty knife to extract switch
Used screwdriver to separate connector from switch
Plugged in connector
Pushed switch assembly into opening
Removed tape
Taped off area around switch to protect surface
Used putty knife to extract switch
Used screwdriver to separate connector from switch
Plugged in connector
Pushed switch assembly into opening
Removed tape
Was this helpful?
Thank you for voting!