This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult....
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
The tine pivot clip, also known as the tine row pivot, is used in dishwashers and is located in the upper dishrack. At around 3 inches in length, the clip is used to keep the tine row in place in the ...
This manufacturer-approved Rack Stop Clip is a gray plastic part which can be installed with a screwdriver. Measuring slightly over an inch in length, it prevents the rack from sliding too far and fal...
Also known as rack adjuster. Sold individually.
This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip...
This part is the replacement door seal for your dishwasher. It is approximately 22 inches long and 2 inches wide. This door seal is made of gray plastic and is found at the bottom the dishwasher. The ...
The part functions by spinning the impeller of the circulation pump, which is used to move the water through the spray arms during the wash cycle.
$283.73
In Stock
Questions And Answers for KUDS30IXSS8
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joan
January 15, 2024
Please let me know when this model was made. Thank you.
For model number KUDS30IXSS8
Hello Joan, thank you for your inquiry. According to our research, your model was approximately manufactured in 2010. For us to locate the exact age, we will require the serial number of your model. Glad to be of assistance!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Stan
December 7, 2019
Is there a food filter that needs to be cleaned periodically? If so, how?
For model number KUDS30IXSS8
Hi Stan, yes there is PS897295, check our video here: https://www.youtube.com/watch?v=DCL17ts6RDU&feature=emb_title. Thank you for your question and good luck with your repair!
The upper dish rack’s white plastic wheels on both left and right sides have broken. What part(s) do we need?
For model number KUDS30IXSS8
Hi Maura, thank you for contacting us. In order to replace the upper rack wheels, you may need to replace the rack adjuster kit, part number PS10064063, since the wheels come as a part of this kit and are not available separately. Let us know if you have further questions!
The power light comes on but the start light doesn’t.
For model number KUDS30IXSS8
Hi Linda, thank you for the question. Based on our understanding, we would suggest checking the control board, part number PS11773157. It manages the functions of the dishwasher, such as washing, draining and drying. You may need to replace it to fix the issue. We hope this sorts out your problem!
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides together. Piece of cake
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough.
I took the broken basket adjuster off and then attached the new one. It wasn't too difficult, however some removal instructions and re-install instructions( or just a picture supplied) would have been helpful. This isn't an issue for a mechanically inclined person, but would be a challenge for someone that isn't. Thanks.
