This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
The pantry drawer lid helps keep everything inside the drawer, it acts as a cover and keeps your drawer at the proper temperature by creating a seal. If the door will not open or close, or if the draw...
This ice maker assembly is designed to produce and dispense ice efficiently within the freezer compartment of compatible refrigerator models. It includes a built-in shut-off arm and a wire harness for...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your fridge door is sweating or hard to open and close, the gasket might need replacing. This gray magnetic gasket helps seal the door tightly to keep cold air in and warm air out. It runs along al...
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
Running out of space in your fridge door? This clear, shallow bin is perfect for organizing jars, bottles, and small items. It’s made from sturdy plastic and fits right into the door—no tools needed. ...
This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.
$14.69
In Stock
Questions And Answers for KRFF305ESS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
March 17, 2020
The freezer door handle is loose. How do i tighten it back up?
For model number KRFF305ESS00
Hello Bill, thank you for your question. There should be a small set screw on the underside of the handle that you can tighten to secure that side of the handle. We hope this helps.
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Jeff
May 11, 2024
Can I get a replacement door gasket for the right hand upper door, and is steadily replaced?
For model number KRFF305ESS00
Hello Jeff, thank you for contacting us. The right side door gasket you are looking for is part number PS11759515. If the gasket is cracked, split, or warped, you will probably need to replace it. If you need help placing an order, customer service is open 7 days a week!
What position does the arm need to be in for the ice maker to be on?Up or down?
i'm not sure if it's broken
For model number KRFF305ESS00
Hi Jean,
Thank you for your question. If the arm on your ice maker is in the up position, it means that the ice bin is full and the ice maker is off. When the arm is in the down position, it is on. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Brendan
October 22, 2025
Air damper not working
For model number KRFF305ESS00
Hello Brendan, thank you for contacting us. The refrigerator air damper may not be working due to being blocked by ice, or a failed motor. First, check for ice buildup around the vents and clear it. If there is no ice, inspect the damper assembly, part number PS11756641, for physical damage or obstructions and test the motor with a multimeter. We hope this information helps!
Freezer light is out. Where is the location and how do I replace the bulb?
Thank you,
For model number KRFF305ESS00
Hello Jerry, thank you for reaching out. The light bulbs are located inside the grille at the top, where the controls are located. To replace the bulb, use the following instructions:
1. Unplug the refrigerator or disconnect the power.
2. Remove the light shield. To disconnect the light shield from the light assembly, slide it toward the back of the compartment.
3. Replace the burned-out bulb with a bulb of the same size, shape, and wattage.
4. Replace the light shield.
5. Plug in the refrigerator or reconnect the power.
We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.
Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
Remove food off of lower shelf, remove the two produce drawers, remove large lower drawer, remove glass shelf, remove three screws holding end cap in place. Once end cap was removed the drawer track could be removed and placed on new end cap. Installation of new end cap took less than 5 minutes. Most of the time spent was removing/replacing food and cleaning the shelf/bins. PartSelect was awesome BTW!
