My Orders
- Home
- KOCE500ESS05
- Instructions
KOCE500ESS05 KitchenAid Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Missing Part on a Scratch and Dent Microwave
5 of 9 people
found this instruction helpful.
-
Kevin from ROSWELL, GA
- Really Easy
- Less than 15 mins
We bought a really nice microwave for about 1/3rd of the MSRP, but it was an open box item and when we got it home we found that it was missing a bracket on the inside of the microwave. We were able to replace the bracket easily thanks to partselect.com.
Was this helpful?
Thank you for voting!
Glass microwave tray broke
4 of 7 people
found this instruction helpful.
-
John from Minden, NV
- Really Easy
- Less than 15 mins
Set the new one inside the microwave
Was this helpful?
Thank you for voting!
Cracked glass tray
3 of 4 people
found this instruction helpful.
-
Richard from SUMMERVILLE, GA
- Very Easy
- Less than 15 mins
Part arrived in timely manner and placed it in microwave oven.
Was this helpful?
Thank you for voting!
LIGHT SWITCH ON LATCH-DOOR BROKEN
3 of 4 people
found this instruction helpful.
-
NORMAN from MISSION VIEJO, CA
- Difficult
- 30 - 60 mins
-
Screw drivers, Wrench set
REMOVED PANEL COVER [ 4 SCREWS]
UNSCREWED 2 SCREWS ON LATCH DOOR
ON THIS MODEL THE PART WAS IN TOO TIGHT OF QUARTERS SO I HAD TO LOOSEN A TOP PANEL SO I COULD RAISE PART HIGH
ENOUGH TO RELEASE IT FROM A CATCH AT THE BACK OF THE PART. PUSH PART BACK, RAISE AND PULL FORWARDS.
REMOVED 4 WIRES ONE AT A TIME AND ATT ... Read more ACHING TO NEW PART. REPLACED PART, TIGHTEN TOP PANEL AND REPLACED PANEL COVER.
NOT BAD FOR A 91 YEAR OLD
UNSCREWED 2 SCREWS ON LATCH DOOR
ON THIS MODEL THE PART WAS IN TOO TIGHT OF QUARTERS SO I HAD TO LOOSEN A TOP PANEL SO I COULD RAISE PART HIGH
ENOUGH TO RELEASE IT FROM A CATCH AT THE BACK OF THE PART. PUSH PART BACK, RAISE AND PULL FORWARDS.
REMOVED 4 WIRES ONE AT A TIME AND ATT ... Read more ACHING TO NEW PART. REPLACED PART, TIGHTEN TOP PANEL AND REPLACED PANEL COVER.
NOT BAD FOR A 91 YEAR OLD
Read less
Was this helpful?
Thank you for voting!
wanted racks that were more stable
2 of 2 people
found this instruction helpful.
-
Julie from BUCKEYE, AZ
- Very Easy
- Less than 15 mins
removed existing racks; slide new rack over both sides to the back.
Was this helpful?
Thank you for voting!
The grill support, which is installed on the ceilling inside the microwave broke
2 of 2 people
found this instruction helpful.
-
Felix from GREER, SC
- Very Easy
- Less than 15 mins
The part is pushed against the ceiling into an opening and then turned 90 degree. That is is.
Was this helpful?
Thank you for voting!
upper oven of wall oven would not heat suspected high temp limit switch
2 of 3 people
found this instruction helpful.
-
William from Carbondale, CO
- Really Easy
- 15 - 30 mins
-
Nutdriver
removed unit from cabinet tested switch it was OK checked wiring and found shorted out wire leading to switch. cut out bad section and spliced wire back together
problem solved
problem solved
Was this helpful?
Thank you for voting!
Broken glass tray
2 of 3 people
found this instruction helpful.
-
Robert from HEMET, CA
- Very Easy
- Less than 15 mins
Just put it in
Was this helpful?
Thank you for voting!
Open the carton and install turntabe glass tray.
2 of 3 people
found this instruction helpful.
-
Roger from LYMAN, ME
- Very Easy
- Less than 15 mins
Fool proof.
Was this helpful?
Thank you for voting!
Missing turntable
1 person
found this instruction helpful.
-
Kristen from Yorba Linda, CA
- Very Easy
- Less than 15 mins
Ordered the part and was extremely pleased with how quickly it shipped and also the packaging was extremely secure. Will definitely purchase from this site again.
Was this helpful?
Thank you for voting!
The ceramic hanger that holds up the element for the convection over broke
1 person
found this instruction helpful.
-
Joyce from Conyers, GA
- Very Easy
- Less than 15 mins
Took about 10 seconds... turn the new ceramic holder sideways, push up in the hole, bring the element up to position and twist the ceramic piece 45 degrees into place to hold element. That's it!!! Very simple....
Was this helpful?
Thank you for voting!
Micro Wave Steamer
1 person
found this instruction helpful.
-
James from MIAMI, FL
- Very Easy
- Less than 15 mins
I spoke to Daily via the phone and I ordered a new steamer since my original steamer cracked over a period of time. No installation, no problems I just recently used it and works perfectly! Thank You!
Was this helpful?
Thank you for voting!
Broken mounting bracket for coils in convection microwave.
4 of 10 people
found this instruction helpful.
-
Larry from Fernandina Beach, FL
- Really Easy
- Less than 15 mins
Very easy, fit perfectly.No tools required.
Was this helpful?
Thank you for voting!
Part broken
1 person
found this instruction helpful.
-
Elena from HOUSTON, TX
- Very Difficult
- Less than 15 mins
We ordered element support 3 times and all three times it came broken. The part is made of porcelain and is fragile , representative asked warehouse to pack it in the box and part still came in envelope.
Requested refund and ordered directly from factory.
Requested refund and ordered directly from factory.
Was this helpful?
Thank you for voting!
I broke the glass cooking tray when instaling my oven microwave combo
2 of 4 people
found this instruction helpful.
-
Jeff from Baytown, TX
- Really Easy
- Less than 15 mins
I put the tray in the microwave???? Pretty easy.
Was this helpful?
Thank you for voting!