- Home
- KMHC319EBL4
- Instructions
KMHC319EBL4 Whirlpool Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bulb burned out
-
Lester from Mesquite, TX
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
You had alerted that it was imperative to unplug unit before starting to remove defective bulb. As described, there was silicon on bulb and socket and bulb broke upon my attempt to remove. Had to use needle nose pliers to get metal base of old bulb from socket, then all went well.
Was this helpful?
Thank you for voting!
changed filters
-
Edward from Oakland, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced filter which came inrecord time.
Was this helpful?
Thank you for voting!
Burned out light bulb
-
Ray from Gatlinburg, TN
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced light bulb.
Was this helpful?
Thank you for voting!
replace light blub
-
roger from palm coast, FL
- Really Easy
- Less than 15 mins
removed grill cover, removed bulb plate, unscrew bulb, screw new bulb in socket,put bulb cover back on and screw grill cover back on. no issues whatsoever.
Was this helpful?
Thank you for voting!
Burn't out bulb.
-
Carter from McCordsville, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the glass cover and replaced the bulb. Very simple.
Was this helpful?
Thank you for voting!
Clearing the clean code was the hardest part.
-
Wayne from New Berlin, WI
- Really Easy
- Less than 15 mins
-
Screw drivers
I had no problem installing the new filter. Just used a phillips screw driver to remove the two screws holding the vent cover in place. Cleaned the dust out of the ducts and reinstalled the new filter. The screws must be held to the screw driver with your finger tips so you don't drop them in the vent cover. The most difficulty I had w
... Read more
as in clearing the clean code from the screen. There are no instructions in the owners manual for doing this. But after several tries I got it.
Read less
Was this helpful?
Thank you for voting!
replace filter
-
Robert from Southfield, MI
- Really Easy
- 15 - 30 mins
-
Screw drivers
Time to replace the charcoal filter
Was this helpful?
Thank you for voting!
2 burned out bulbs under the microwave/important light source for kitchen stove.
-
Ferol from San Antonio, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
I didn't do the repair -- my husband did, said it was easy, had no problems what so ever! The new bulbs give a lot more light to the cooking area.
Was this helpful?
Thank you for voting!
Burned out lightbulb
-
Paul from Norristown, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
First let me say that I tried several places to get what I thought was a simple light bulb. This included several national hardware stores as well as a national electrical supply company. No luck. Went to the manual and PartSelect. Not only did you have it in stock, ship right away,at a reasonable price it arrived in a matter of days. One
... Read more
would not normally think of receiving a "how to" video to change a light bulb but you did. That impressed me. Suffice to say the replacement went well and you can be certain the next time I need a part I will go to you first. I am also impressed with the organizations with which you are affiliated with. BBB, Norton, PayPal, money back guarantee etc. Thank You The entire process was made pleasant with your support.
Read less
Was this helpful?
Thank you for voting!