All Installation Instructions for KitchenAid Microwave KHMS1850SSS2

Dropped the glass cooking tray and it broke in half

Looked up the Whirlpool Co. and ordered the part. It was quite simple. Arrived in 2 days and I simply placed it in the microware. It was very very easy!

E. Robinson

Parts Used:

Glass Cooking Tray

Emily C from Brandon, MS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Grill vent was broken

All it took was 2 screws and it was done - could not have been simpler.

Parts Used:

Vent Grille

Rick from Ormond Beach, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replace vent grille

Set in place and installed 2 screws. Took less than 5 min.

Parts Used:

Vent Grille

Kathleen from ROY, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken plastic attachment for vent grill cover

Replacement of new vent grille took less than 5 minutes. I just wished Kitchen Aid made a product that lasted longer than 3 years. My part arrived very quickly, less than a week. Service was great and so was your price. I had no problem locating a replacement part. Kitchen Aid would not give me the parts number so I did not know if I was order the right part. But you photo really helped to narrow the correct part. Thanks

Parts Used:

Vent Grille

judith from holland, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Plastic mounting bracket broken heat/stress

Remove two screws, remove grill/bracket, replace grill/bracket, replace two screws and your done. Recycle if You Can.

Parts Used:

Vent Grille

Dwight from Los Lunas, NM
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Plastic tabs sheared off screws

Removed old screws and pieces of plastic. Replaced new grill vent with old screws. Could not have been any easier

Parts Used:

Vent Grille

NANCY from CHICAGO, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broke rotating plate, it fell off counter after being washed

Opened door and put new plate in.

Placed order on Thursday evening and received Sat Am

Parts Used:

Glass Cooking Tray

Lois P from Morris, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

One of the wheels came off

Took out turntable and swapped out old one with a new bright and shiny
New one, ring that is. It was easy using the part from parts select
Thanks
Paul

Parts Used:

Microwave Turn Ring

Paul from EXETER, NH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replaced vent grill.

Took this great-grandmother of 7 less than 3 minutes. Only needed a Phillips screwdriver. Easy as pie!

Parts Used:

Vent Grille

Grace from WOODSTOCK, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Brittle, plastic mounts broke,Vent fell when cleaning

Removed remaining plastic around 2 screws. I recommend a Magnetic Phillips Screwdriver, screw holes are a little Offset, and mount screws are small. I used Needle Nose Pliers to hold screw, to get it started. Really simple install.

Parts Used:

Vent Grille

Robin from AUBURN, AL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Upper trim piece fell off

1. Remove two screws
2. Install new part
3. Replace two screws

Parts Used:

Vent Grille

George S from LEWES, DE
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Burned out light bulb which lit the surface of the range.

Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.

Parts Used:

Light Bulb - 40W

Michael J from LORAIN, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I noticed that the hood lights were out.

I took off the glass panel underneath the microwave and replaced the 2 bulbs in less than 3 minutes by myself with only a phillips head screwdriver. I was very pleased with the service I received and more pleased with myself that I did not have to call in a repair man.

Parts Used:

Microwave Surface Light Bulb

linda from brockton, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

machine was dead.

After removing the over-the-range unit (no small feat!) I had to figure out how to open the case (good puzzle!). Capacitor had already discharged, so it was very easy to reach in, pop the old fuse and install the new one! As per your advice, I found out I was a "28%-er"! Upon re-installation, the microwave "sprang to life"!! Thanks, "Part Select"!! I was already shopping around for a new machine! (Now if you could only tell me an easier way to re-mount this heavy beast over the stove!!!)

Parts Used: