KHMS1850SSS1 KitchenAid Microwave - Instructions

Replaced light bulb.

I noticed on some of the installation instructions provided by others that numerous individuals have experienced the same problem. I decided to try to lengthen the life of my repair and so I added an aluminum screen patch and some expoxy glue to the tabs that hold the screws. I figured that this might provide some additional strength to the grille and hopefully I wouldn't have to repair it again. Time will tell if this modification will be successful.

First let me say that I tried several places to get what I thought was a simple light bulb. This included several national hardware stores as well as a national electrical supply company. No luck. Went to the manual and PartSelect. Not only did you have it in stock, ship right away,at a reasonable price it arrived in a matter of days. One would not normally think of receiving a "how to" video to change a light bulb but you did. That impressed me. Suffice to say the replacement went well and you can be certain the next time I need a part I will go to you first. I am also impressed with the organizations with which you are affiliated with. BBB, Norton, PayPal, money back guarantee etc. Thank You The entire process was made pleasant with your support.

The part was shipped quite fast. I received it after 3 days of my order. Installing the part was a breeze. Took about 5 minutes. The part was as described and looked identical to the original one.

Simply placed new dish on the rotating hub.

Used the new parts, they were a perfect match, I completed the work in 5 mins or less. The pictures provided were very helpful, and parts were delivered very fast. Price was the lowest too!!

Attached bracket to wall with screws and hung microwave oven. Very easy project.

Remove the screws from the unit metal tabs. Insert two locator tabs of the grill into the slits in the unit and install the two mounting screws. SIMPLE

Arrived in 24hours!!! Great.

I simply removed the mesh guards in the bottom of the microwave ad placed the new charcoal filters behind them and replaced them in the slots under the appliance.

There are two screws that hold the unit on. Very simple to install. When you clean the vent grille don't push too hard on it or you will be replacing it again...

Took out the screws and replaced the vent. (here is a trick, to make getting the screws in a rather hard to reach area I glued them to the end of the screwdriver-super glue)

Slide the old one out of the slot and insert the new one in its place.

Twas really easy considering that all I had to do was place the plate back in the microwave. Easy Peasey

Tray arrived in a short period of time and was a perfect match.