This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$17.95
In Stock
Order within the next 12 hrs and your part ships today!
This broiler pan and roasting rack set features a two-piece design that allows fat to drain away for cleaner cooking and reduced splatter. Made with a durable, high-heat resistant porcelain finish, it...
$63.09
In Stock
Order within the next 12 hrs and your part ships today!
If your oven isn’t heating properly or seems to be getting too hot, the high-limit thermostat might be the issue. This part helps keep things safe by shutting off the heat if the temperature gets too ...
$138.98
In Stock
Order within the next 12 hrs and your part ships today!
If your oven door glass is cracked or letting heat escape, this replacement panel can help restore performance and safety. It’s the inner glass you see when you open the oven, designed to handle high ...
$549.60
In Stock
Order within the next 12 hrs and your part ships today!
Order within the next 12 hrs and your part ships today!
Questions And Answers for KEBS209BSS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Grace
January 11, 2025
Hi
I need to replace just the inside glass panel on the door. It cracked during self cleaning mode.
Do you sell just that? Thank you.
For model number KEBS209BSS00
Hi Grace,
Thank you for your question. The part number for the inner door liner and glass assembly is PS11753108. We hope this helps!
The upper oven will not self clean it sounds like the latch is locking but nothing happens. I ordered a new latch and installed it, we ran the clean cycle and the new latch locked, but the cycle didn't run. Then the latch stayed locked and we couldn't open the door.
For model number KEBS209BSS00
Hi Richard, thank you for contacting us. As you have already replaced the door latch, it seems that there is an issue with the oven control board, part number PS11757373. The control board might not be sending the correct signals to initiate the self-cleaning cycle. You may need to replace it to fix the issue. We hope this sorts out your problem!
Top oven locked while self-cleaning and lost all power. I got the top oven open and changed thermal fuse
The bottom oven works but top oven won't heat up. What is the solution?
For model number KEBS209BSS00
Hi Anthony, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the upper oven sensor for continuity. If this is not the issue, we would recommend replacing the control board, part number PS11757373, to solve the problem. Glad to be of assistance!
Not a repair. Just needed to replace the meat probe sensor for the programmable oven. Quick and easy purchase and very fast delivery took care of the problem. I was back in business.
Remove the oven door. Remove 3 self tappers on rear wall of oven to take off a round access panel. Pull out a pre-cut rectangle of insulation. Next I removed the 2 screws holding the sensor in place. Pulling the sensor out a bit told me I was "touching" the correct wires in the SMALL rectangular opening. The wires are not visable and 2 hands do not fit in this small opening.I looked at the NEW sensor to see the release on the sensor plug. Slip the angled needle nose into the opening and grasp the plug/release side. The plug pulled apart easily. The sensor wire pulls out with a little bit of twisting to fit it out the hole. The new plug pushes in and has to be worked down to where you can reach it. The same angled plier works to re-attach it. It takes longer to read this than to do the job. Best of luck, Al
