My Orders
- Home
- KDFM404KPS1
- Instructions
KDFM404KPS1 Admiral Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Tine on rack was rusted and needed to be replaced.
2 of 4 people
found this instruction helpful.
-
Jeanne from FAYETTE, OH
- Really Easy
- Less than 15 mins
Just replaced it in the notches that held the rusted tine.
Was this helpful?
Thank you for voting!
Bought lower rack, but discovered we didn't need it. Ordered the tine rack instead.
1 person
found this instruction helpful.
-
Susan from Bath, ME
- Very Easy
- Less than 15 mins
Our experience was amazing. The part itself simply needed to be replaced: dropped into the lower rack and it was done. The amazing part was the wonderful service that this site provided. We discovered our initial mistake, contacted the company, and received instructions for how to return it. Then we ordered the tine and it was sent im
... Read more
mediately. Just received confirmation that the returned lower rack had been received, so the process is complete to our great satisfaction. This site really has it down for providing excellent customer service. They are terrific!! Thank you!
Read less
Was this helpful?
Thank you for voting!
tine-row rusted and broke
2 of 5 people
found this instruction helpful.
-
Warren from Ballston Lake, NY
- Really Easy
- Less than 15 mins
quick and easy,tine-row just snapped right in! Took about 15 seconds!
Was this helpful?
Thank you for voting!
The dishwasher came without the middle rack arm manifold
1 of 3 people
found this instruction helpful.
-
Patrick from WICHITA, KS
- Very Easy
- Less than 15 mins
-
Screw drivers
I just popped the new one onto the bottom of the middle rack and it was done. Easiest repair I have EVER done!
Was this helpful?
Thank you for voting!
fitting leaking
0 of 1 people
found this instruction helpful.
-
James from Tupelo, MS
- Really Easy
- Less than 15 mins
-
Pliers
repair by replacement
Was this helpful?
Thank you for voting!
The Dishwasher was not firmly connected to the counter
0 of 2 people
found this instruction helpful.
-
Antony from Lakewood Ranch, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Very simple repair when you're supplied with the proper parts. Their delivery time is exceptional !
Was this helpful?
Thank you for voting!
Screws on the door of the dishwasher were very loose.
1 of 6 people
found this instruction helpful.
-
Kathryn from Carol Stream, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
Went to PartsSelect. Put in Dishwasher model number. Chose the screws for that model number. Ordered the screws. Can't get any easier than that!
Was this helpful?
Thank you for voting!
Under Counter Anti-Tip Brackets Broke
-
Scott from Maple Valley, WA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I put this unit in about 3 years ago and the brackets broke at the crease and the dishwasher fell forward. Found the right bracket and when it arrived looked a match. Checked link to video showing how to properly install the brackets. The original manufacturer never stated that the tab that goes through the frame is supposed to be bent 90
... Read more
degrees to prevent the bracket from coming out. Thank you PartSelect for that video because I would probably end up ordering brackets again in a few years.
Read less
Was this helpful?
Thank you for voting!
lower rack tine was broken
-
Carol from Lutherville, MD
- Really Easy
- Less than 15 mins
Just snapped it in
Was this helpful?
Thank you for voting!
Two rusted lower tine rows
-
Lisa from Ormond Beach, FL
- Really Easy
- Less than 15 mins
Quick and easy repair--less than a minute for each row. The replacement tines are a finer gauge than the originals but fit the space well.
Was this helpful?
Thank you for voting!
none
-
Edith from Marietta, OH
- Really Easy
- Less than 15 mins
removed old rack and replaced with the new.
Was this helpful?
Thank you for voting!
I had not needed to install the mounting brackets that came with the dishwasher because the old counter top was 1 inch lower than standard and I was able to just wedge the dishwasher into the space and it would not tip.
-
Bob from Montrose, CO
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
I simply disconnected the power line to the dishwasher and pulled it out enough to install the mounting brackets. The installation manual that came with the dishwasher described how to install the brackets and I simply followed directions.
Was this helpful?
Thank you for voting!