KDFE104DSS2 KitchenAid Dishwasher - Parts

The lower door seal prevents water leaks by sealing the gap between the dishwasher door and tub. Suitable for select Whirlpool and related brands, it’s ideal for restoring leak-free operation. Ensure proper seating by closing the door for a few hours post-installation.

This part is used to drain water from your dishwasher.

If your dishwasher isn’t cleaning dishes like it used to or making strange noises, this circulation pump might be the fix. It’s the part that pushes water through the spray arms during the wash cycle—not to be confused with the drain pump. A faulty pump can cause poor cleaning, leaks, or even stop the cycle altogether. This genuine part f...Read moreits select Whirlpool models, so be sure to check yours before ordering. And don’t forget to unplug the dishwasher before installing!

This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.

This dishwasher door spring is sold individually. It is recommended if you are replacing one side, to replace both.

Includes power cord and all necessary parts needed for complete installation of cord.

This is an upper spray arm for a dishwasher. While the appliance is in use, the spray arm rotates while water travels through it to distribute water evenly throughout the dishwasher tub. This ensures the dishes are efficiently and properly cleaned. It measures approximately 19 inches long and is grey in color.

This dishwasher screen filter helps protect the pump by preventing food particles and debris from entering the system. If your current filter is missing, damaged, or no longer effective, replacing it is essential for maintaining proper cleaning performance. Installation is simple—just twist and remove the lower filter, then lift this scre...Read moreen filter out and insert the new one. This part is sold individually and does not include additional accessories.

This is the replacement adjuster housing for your dishwasher. It is made of gray plastic and is approximately 4X4 inches. The adjuster housing clips into the dish rack and allows you to adjust the height of the rack. Because it is made of plastic, the housing can occasionally break. When this happens you may notice that one side of your d...Read moreish rack is lower than the other. If the housing is damaged, you will not be able to properly adjust the dish rack height. This is an authentic OEM part sourced directly from the manufacturer and is sold individually.

Sold individually.