KD2661XMC3 Whirlpool Mixer - Parts

This is a manufacturer-approved gear, used in stand mixers.

Includes both the attachment and beveled gear. This worm follower gear is for stand mixers. Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached. Unplug the mixer before installing this part. Wear work gloves to protect your hands.

Keep your stand mixer running smoothly with this replacement worm gear, which powers the planetary assembly where beaters and other attachments connect. Made from high-quality metal, it’s built to withstand regular use. Common signs of a failing gear include the mixer not starting, inconsistent mixing, or strange grinding sounds. This par...Read moret is compatible with select models and is a reliable fix for restoring performance.

This metallic retaining ring is less than an inch in diameter. It is made entirely of metal.

Used on Stand Mixers.

This Stand Mixer Gear Grease lubricates the moving parts of the stand mixer.

Used in Mixers.

This bearing comes equipped with two washers and is used on stand mixers.

If your stand mixer isn’t adjusting speeds like it used to, this speed control switch might be the fix. It comes with the black knob and lets you fine-tune how fast your mixer runs—perfect for everything from slow stirring to fast whipping. It’s a genuine part made for KitchenAid and Whirlpool mixers, so you know it’ll fit right. Just make sure to unplug your mixer before swapping it out!

This small metal pin locks the center gear to its shaft inside a stand mixer. Replace it if the pin is bent, broken, or missing. A damaged pin may let the motor run while the beater stays still. This is an internal gear pin, not the large hinge pin that joins the mixer head to the base. Use the full mixer model number to guarantee the proper fit. Unplug the mixer before opening the gear housing.

This part is used with the stand mixers attachments, as well as to hold the end cap to the front of the mixer.

NOTE: This part has been upgraded from plastic to metal housing. Gasket is no longer available separately. ***Used with Stand Mixers.