All Installation Instructions for Jenn-Air Microwave Oven Combo JMW3430LL03

Cracked glass tray

Part arrived in timely manner and placed it in microwave oven.

Parts Used:

Microwave Turntable Tray

Richard from SUMMERVILLE, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Glass microwave tray broke

Set the new one inside the microwave

Parts Used:

Microwave Turntable Tray

John from Minden, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

upper oven of wall oven would not heat suspected high temp limit switch

removed unit from cabinet tested switch it was OK checked wiring and found shorted out wire leading to switch. cut out bad section and spliced wire back together
problem solved

Parts Used:

Thermostat

William from Carbondale, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The grill support, which is installed on the ceilling inside the microwave broke

The part is pushed against the ceiling into an opening and then turned 90 degree. That is is.

Parts Used:

GRILL SUPPORT

Felix from GREER, SC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Open the carton and install turntabe glass tray.

Fool proof.

Parts Used:

Microwave Turntable Tray

Roger from LYMAN, ME
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken glass tray

Just put it in

Parts Used:

Microwave Turntable Tray

Robert from HEMET, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Part broken

We ordered element support 3 times and all three times it came broken. The part is made of porcelain and is fragile , representative asked warehouse to pack it in the box and part still came in envelope.
Requested refund and ordered directly from factory.

Parts Used:

GRILL SUPPORT

Elena from HOUSTON, TX
Difficulty Level:
Very Difficult
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

INTERIOR OVEN LIGHT

EASILY REMOVED GLASS COVER INSIDE OVEN AND REMOVED SMALL HALOGEN LIGHT BULB.
RECEIVED REPLACED WITHIN TWO DAYS OF ORDER AND REPLACED BULB AND GLASS COVER IN ABOUT 10 MINUTES.
MOST DIFFICULTY WAS HAVING TO BEND DOWN TO REACH INSIDE OF OVEN TO LOCATE POSITION TO INSERT BULB.

Parts Used:

Halogen Light Bulb

Gary from WALTON, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Grill support broke. Sounds like a common problem based on other’s comment.

Turn the grill support 90 degrees to the opening in ceiling of micro. Insert then turn back 90 degrees so the support is in-line with the slot. Hang the wire on the support. Hours of worry over what this was gonna cost me to get repaired, then a 45 second fix costing only 29 bucks.

Parts Used:

GRILL SUPPORT

Andrew from LAKEVILLE, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The ceramic hanger that holds up the element for the convection over broke

Took about 10 seconds... turn the new ceramic holder sideways, push up in the hole, bring the element up to position and twist the ceramic piece 45 degrees into place to hold element. That's it!!! Very simple....

Parts Used:

GRILL SUPPORT

Joyce from Conyers, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I broke the glass cooking tray when instaling my oven microwave combo

I put the tray in the microwave???? Pretty easy.

Parts Used:

Microwave Turntable Tray

Jeff from Baytown, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken mounting bracket for coils in convection microwave.

Very easy, fit perfectly.No tools required.

Parts Used:

GRILL SUPPORT

Larry from Fernandina Beach, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

replace spindle on turning table

exact part in with the new out with the old

Parts Used:

Microwave Turn Ring

jeff from las vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven light bulb inop

Taking off the glass lense for the light bulb was harder than I thought. It unscrews counterclockwise, but it was very hard to get off. It would not turn. I ended up using connector pliers I use for work, that has rubber jaws. The lense unscrewed very easy with it. Light also unscrews out. PartSelect.com is the only way to go to buy parts for appliances. It is simple, even has the illustrated parts catalog. And it saves a lot of time and gas, driving around looking for the part!!. PartSelect came through again.

Parts Used: