- Home
- JMV9186WS2
- Instructions
JMV9186WS2 Jenn-Air Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!
4 of 18 people
found this instruction helpful.
-
Stephen from SPRINGFIELD, WV
- Very Difficult
- 1- 2 hours
-
Pliers, Screw drivers
Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!
Was this helpful?
Thank you for voting!
Noisy turntable motor
-
Bruce from Rock Island, IL
- Really Easy
- 15 - 30 mins
-
Screw drivers
Unplug microwave. Remove turntable and support from inside. Remove outside bottom cover (10 screws). Remove 2 torx screws holding motor in place. Remove 2 wires from motor, noting colors. Wires are held with spade connectors that has a small tab that needs to be depressed. Remove washer from motor and place on new motor. Entire procedure
... Read more
very easy.
Read less
Was this helpful?
Thank you for voting!
Broken plate
-
JASON from ABSECON, NJ
- Really Easy
- Less than 15 mins
Took the replacement plate out of the box and put it in the microwave in seconds. I never realized how much of a difference having the correct microwave plate would make. It's great to have it back.
Was this helpful?
Thank you for voting!
Burned out lightbulb
-
Paul from Norristown, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
First let me say that I tried several places to get what I thought was a simple light bulb. This included several national hardware stores as well as a national electrical supply company. No luck. Went to the manual and PartSelect. Not only did you have it in stock, ship right away,at a reasonable price it arrived in a matter of days. One
... Read more
would not normally think of receiving a "how to" video to change a light bulb but you did. That impressed me. Suffice to say the replacement went well and you can be certain the next time I need a part I will go to you first. I am also impressed with the organizations with which you are affiliated with. BBB, Norton, PayPal, money back guarantee etc. Thank You The entire process was made pleasant with your support.
Read less
Was this helpful?
Thank you for voting!
replace filter
-
Robert from Southfield, MI
- Really Easy
- 15 - 30 mins
-
Screw drivers
Time to replace the charcoal filter
Was this helpful?
Thank you for voting!
2 burned out bulbs under the microwave/important light source for kitchen stove.
-
Ferol from San Antonio, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
I didn't do the repair -- my husband did, said it was easy, had no problems what so ever! The new bulbs give a lot more light to the cooking area.
Was this helpful?
Thank you for voting!
The glass tray in the microwave got chipped while i was washing it and started to crack.
-
Amber from Loretto, PA
- Really Easy
- Less than 15 mins
I just opened the box and set it in. Took all of two minutes.
Was this helpful?
Thank you for voting!
Burn't out bulb.
-
Carter from McCordsville, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the glass cover and replaced the bulb. Very simple.
Was this helpful?
Thank you for voting!
Clearing the clean code was the hardest part.
-
Wayne from New Berlin, WI
- Really Easy
- Less than 15 mins
-
Screw drivers
I had no problem installing the new filter. Just used a phillips screw driver to remove the two screws holding the vent cover in place. Cleaned the dust out of the ducts and reinstalled the new filter. The screws must be held to the screw driver with your finger tips so you don't drop them in the vent cover. The most difficulty I had w
... Read more
as in clearing the clean code from the screen. There are no instructions in the owners manual for doing this. But after several tries I got it.
Read less
Was this helpful?
Thank you for voting!
Broke a 15 year old glass cooking tray
-
Stephanie from La Jolla, CA
- Really Easy
- Less than 15 mins
Ordered the item on a Monday at 12pm and it arrived the next day. Amazing!
Was this helpful?
Thank you for voting!
glass cooking tray droped and broken
-
janice from dunn, NC
- Really Easy
- Less than 15 mins
just replace need cooking tray
Was this helpful?
Thank you for voting!
Replacement
-
George from Statham, GA
- Really Easy
- Less than 15 mins
Easy, perfect
Was this helpful?
Thank you for voting!
changed filters
-
Edward from Oakland, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced filter which came inrecord time.
Was this helpful?
Thank you for voting!
A glass fell out of pantry onto glass tray and broke it.
-
Al from Torrance, CA
- Really Easy
- Less than 15 mins
I called the repair/parts number to make sure I had correct parts and the young lady instructed me as to the size of the serving tray; within 48 hours we had the VERY carefully wrapped carton opened and back in the microwave, working perfectly. Thank you. We'll recommend you to our friends!
Was this helpful?
Thank you for voting!
Burned out light bulb
-
Ray from Gatlinburg, TN
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced light bulb.
Was this helpful?
Thank you for voting!