JFC2290VEP5 Jenn-Air Refrigerator - Parts

This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the owner manual. Replacing this water filter may fix a noisy or leaking fridge, a fridge that is not dispensing water (or reduced flow rate), ...Read moreand an ice maker that is not making ice at all, or not making enough ice. This filter is white, sold individually and measures 8 inches by 3 inches in diameter. This water filter has been updated by the manufacturer. It may appear different but will still function the same. It is sold individually.

Also known as a duck bill. This kit includes the tube extension piece and spacer.

This modular ice maker assembly replaces worn-out units to restore ice production in refrigerators. It includes the ice mold and control device but excludes the cover, ice level arm, wire harness, and mounting hardware, which must be reused or ordered separately. Unplug the refrigerator before installation and use work gloves for safety. Check compatibility with your model number before purchase.

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

This is a replacement end cap for your refrigerator pantry drawer. The pantry drawer has an endcap on either side, which encloses the drawer. This end cap is for the left side of the pantry drawer only. Make sure you need the left side end cap before you order this part. This part is made of white plastic, and will fit into position on th...Read moree left side of the pantry drawer. This part is approximately 20 inches wide and 7 inches tall. It is an OEM part sourced directly from the manufacturer.

This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninterrupted water flow to the dispenser and ice maker when the filter is removed or non-functional. The cap fits securely into the water filter h...Read moreead, providing a temporary or permanent bypass solution without filtering the water. It is commonly used during troubleshooting or when a replacement filter is unavailable. The kit includes the bypass cap and may feature installation instructions for quick and secure setup. Note: This part does not purify water and should not be used as a substitute for a functioning filter in systems requiring filtration.

This part is the replacement for the end cap on your refrigerator pantry drawer. Your pantry drawer will have two end caps; one for the right side and one for the left. This is the end cap for the right-hand side, and is sold separately from the left end cap. The part is made of white plastic and is an OEM part sourced directly from the m...Read moreanufacturer. To remove the old pantry drawer end cap, simply remove the pantry drawer and disconnect the end cap. Replace it with a new one, and slide the pantry drawer back into place.

Need more space in your fridge door or dealing with a cracked bin? This shelf bin is a quick and easy fix. It’s made from sturdy plastic and is perfect for holding condiments, drinks, or small items. Just slide out the old one and pop in the new—no tools needed. It helps keep your fridge neat and your items secure.

Sold individually.

Keep your fridge running efficiently with this easy-to-install door gasket. It helps seal in cold air and keep warm air out, so your food stays fresh and your energy bills stay low. The flexible gray material includes a magnetic strip for a tight fit and measures about 42" by 17.5". It works with many Whirlpool, KitchenAid, Kenmore, and M...Read moreaytag models. If your current gasket looks worn or isn’t sealing well, swapping it out can make a big difference. Just check your model number to be sure it’s the right fit.

Keep your fridge organized and your food fresh with this pantry drawer cover. It’s the clear and white plastic piece that fits over the front of the drawer and helps keep the temperature steady inside. The built-in handle makes it easy to slide the drawer open and closed. It’s made to fit a range of models from Whirlpool and other brands—...Read morejust check your fridge’s model number before ordering. Installation is quick and easy, no tools needed.

This part helps keep your fridge at the right temperature by controlling how much cold air flows in from the freezer. If your fridge feels too warm, too cold, or makes strange noises, this damper might be the issue. It fits several Whirlpool, KitchenAid, Maytag, and Amana models and is designed to work reliably. Before installing, unplug the fridge or turn off the circuit breaker to stay safe.