Models > JED8230ADS > Instructions

JED8230ADS Jenn-Air Cooktop - Instructions

All Instructions for the JED8230ADS
76 - 90 of 204
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
fan switch pushed through, plastic housing broken
Flip the breaker. Lift off the fan center grate. Remove two screws located on back of the burner dials housing. Lift the back of the housing, then pull this gently away from the front to unhook the front. Turn this over, locate the switch. Pull the three electrical plug connections from the switch plastic housing, remembering their locations. Back off the two nuts holding the switch to the underneath side of the dials housing. Place the new one in place, put it all back together.
Parts Used:
Fan Switch - Black
  • Lois from Alpharetta, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacement of worn out burner cartridges
Pulled out old cartridges and installed new. Very easy and they work perfectly.
I was very happy with the extremely timely receipt of my purchase which was overnight. I paid for standard 3-5 day delivery.
This was a wonderful experience and I thank you again for your help.
Parts Used:
Black Radiant Element Cartridge
  • karen l from bethlehem, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace grill with burners
Lifted the grill out and slid the new burner unit in place. This was very easy; no problem at all.
Parts Used:
Stove Cartridge Assembly
  • William from Lake Park, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad burner on surface module.
Remove old module and insert new one. Took longer to get out of box than to install.
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Russell from CHAMPAIGN, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
None
Just slipped the part into the electric outlet
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Shirley from CALLAHAN, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
nothing fit
I got the switch wired correctly, with much cussing. It worked - burner heated. But I couldn't get the new switch to fit back with the old ones neatly enough to close the box and secure it. Got help from someone with stronger hands but still couldn't get it to fit. On top of that I found that the new knobs didn't fit on the new switch - or even on the old switches. The old knob didn't fit on the new switch either. I gave up. Removed the new switch and took out the corresponding burner. Still have 3 burners that work.
Repair folks had warned me that I couldn't get parts. They didn't say that it would look like there was a replacement part but it wouldn't fit!
Parts Used:
Surface Burner Switch Burner Control Knob - Black
  • Lindsay from SANTA FE, NM
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
jenn-air coil element was old (1983) just needed to be replasted
took the old one out ,poped the new one in, took 2 minutes
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • HELGA from INDIAN TRAIL, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the burners in one of the glass ceramic cooktops stopped working.
I first thought it was the switch. I ordered one and the wrong one was shipped to me FROM ANOTHER COMPANY. After more trouble shooting I discovered it was the cartridge that needed to be replaces. I ordered one and again, the wrong one was shipped to me. They told me I could not get the right part because they were not made anymore.

So, I shipped it back and got in touch with Part Select. They found the right part and shipped it to me in 2 days. Problem fixed with the EXACT right part. I ordered the first part more than two months prior to receiving the correct part from PartSelect. All I had to do was plug it in to the recepticle in the stove. No tools required.
Parts Used:
Black Radiant Element Cartridge
  • Lynn from ARVADA, CO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
needed new coil cartridge
Just plugged it in
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Kathryn from Truxton, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old elements were getting old.
I took them out of the box, Took the old Elements out and put the new ones in, It was a piece of Cake, You have wonderful girl working for you, she was just great. thanks for the good service. my range looks like a new now. Nora
Parts Used:
Stove Cartridge Assembly
  • Nora from Inez, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken burner grill element
plugged new one in
Parts Used:
Grill Element
  • KEITH from SALT LAKE CITY, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Change the Oil/Grease Filter
It is so easy. Once I found the right size of filter from the website, I ordered it right away. It came in 3 days and I just need to take out the old one and insert the new one. No instruction is necessary. By the way, the price of the filter is one third of that from Jenn-air.
Parts Used:
Grease Filter
  • Yong from Houston, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The original grease filter was damaged in our dishwasher (it is quite fragile) and needed to be replaced.
1. Remove the exhaust vent cover, located in the center of the top of the range. It just lifts off.
2. Swivel the clamp 90 degrees to release the filter.
3. Remove the filter and throw it away
4. Place new filter in place and lock in place by rotating the swivel clamp back 90 degress.
5. Replace the exhaust vent cover
Parts Used:
Grease Filter
  • Martyn from Middletown, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
one of our indicator lights came broken when we purchased the cooktop
We removed all the screws in order to remove the top cooktop frame. Once we did, the bottom part of the cooktop fell! It was being held up by the vent that goes underneath. My son and I had to get underneath to push up while my husband tried to position the cooktop back over the counter top ledge. It was VERY heavy. This was difficult and needless to say, it fell a couple more times before we finally were able to keep it on the ledge. We had to turn off the electricity, pulled the element out and disconnected the two wires, installed the new light and then placed the cooktop cover back in place by screwing all the screws. We did test the light before screwing on the cooktop cover JUST in case...:) It worked!
Parts Used:
Red Indicator Light
  • Eva from Killeen, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The paint on the very old cartridge peeled off
It was so easy. I just unplugged the old catridge and plugged the new one. Thanks for the fast and great service at a competetive price. I am a very satisfied customer who will definitely be returning and recommending your service.
Parts Used:
Stove Cartridge Assembly
  • Isam from Irving, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JED8230ADS
76 - 90 of 204