JEC8430ADS Jenn-Air Cooktop - Instructions

Access to burner nothing like on-line videos:

1) Remove 4 screws under front control panel. (Oven door needs to be open.)
2) Remove 2 flat head screws on sides of control panel. This will loosen control panel. Capture control panel to keep from hanging from wires/connectors. I used hooks made from a wire hanger.
3) Remove 2 screws to remove two steel panels on either side of stove.
4) Remove rear screw of the 2 front screws now exposed and 2 rear screws near top of stove.
5) Carefully flip over glass top being careful not to pull on the wires.
6) Identify burner to be replaced. Note 2 numbers where two clamps are attached to burner.
7) Using 3/8” nut driver, remove screws to allow removal of burner. Remove wires per included instructions. Remove burner.
8) Place new burner under clamps and align to the holes by the two numbers noted in step 6 above.
9) Connect wires to new burner as per included instructions.
10) Reverse removal steps.

Took old knobs off & put new ones on.

Followed the instructions in the video provided by PartSelect, which was very accurate. They only problem I have encountered is that the wiring from the old element compared to the new element do not match up 100%. I had to call Whirlpool today and schedule a Tech to come out and see if they can resolve the problem. Right now, when the burner is turned on, both the inner and outer elements turn on.

Remove old knobs and remove old grommets. Insert new grommets, install new knobs.

Went well. Husband, who has some appliance repair experience, did repair in less than a hour. Replacement burner was not an exact duplicate of original but he was able to adjust for that.

This was a simple replacement of a burner knob. The website had exactly what I needed, including a photograph so I was sure it was the exact match. Delivered quickly and was perfect.

I used the digital multimeter for measure the voltage in the burner and in the digital part,I saw the electric cables

I lifted off the broken handle and replaced it with a new handle. It worked.

Thanks for the previous viewer's tip, disconnect power, pushed the cook top out of the counter and used a wood block for the support. Unscrew the smooth top from the burner, remove old and plug in the new one. Connect power, test OK. Put everything back.

Took broken knob off and slid the new one on. DONE!!!

We have had this appliance for 18 months. Within one month the first knob broke. A month later, the second knob broke. We have gently been using the remaining 2 knobs for 4 burner positions until recently when the other 2 broke. I am hoping these new knobs are made better then those that came with the appliance.

First went to an appliance distrib. store.They would have to part.Was qouted a price.Wenthome and went online to partselect.com and saved 40% even with shipping.Got the part the next day!Pulled old knob off and pushed new knob on.Thank you for making it easy.

So simple -- any monkey could do it. Pull off the old knobs and push on the new.

Removed old knobs and replaced with new ones.

The part was here three days after ordering and I put it on with no tools in less than a minure.