Models > JCP360BV1BB > Instructions

JCP360BV1BB General Electric Cooktop - Instructions

All Instructions for the JCP360BV1BB
61 - 62 of 62
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burner would not work
turned off breaker feeding electricity to cooktop, pulled cook top out of counter top, removed screws holding glass to cook top, removed knobs, replaced switches, replaced everything in reverse order. before re-installing glass I turned power back on and tested burner for operation.
Parts Used:
Surface Element Switch - 1900W Surface Burner Switch - 6 Inch- 1200W SWITCH INFINITE CONTROL
  • Robert from Plaquemine, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Element would not turn off
Set cooktop circuit breaker to off.
Remove hold-down straps from underneath cooktop.
Lift cooktop from counter.
Remove screws holding glass top to base.
Remove screws holding switches
Remove two screws holding element switch.
Move wires from bad switch to new switch.
Reinstall.
Parts Used:
Surface Element Switch - 1900W
  • NEIL from FRIENDSWOOD, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JCP360BV1BB
61 - 62 of 62
Back to Top