All Installation Instructions for Whirlpool Microwave IMH15XRQ2

vent grill tabs broke off

took old vent grill and tabs off using phillip screwdriver. started putting new grill on and it wouldnt go on. got to looking and there are two more screws that you have to loosen up so the grill will go into place these two screws are between the two tabs at each end. caution do not over tighten the screws it will break the tabs. overall easy to install.

Parts Used:

Vent Grille

KENNETH from ROGERSVILLE, AL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Vent was Broken.

I, carefully, inserted the bottom tabs into the appropriate slots. I then rotated the vent piece up and into place under the top lip of the Microwave. Once positioned I installed the screws required to hold the piece in place. Very simple replacement. It gave me a chance to clean the grease behind the vent.

Parts Used:

Vent Grille

Tom from Missoula, MT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

the part disintegrated from heat and grease.

two screws placed at the ends of the part secured it to the microwave oven body.

Parts Used:

Vent Grille

gary from jacksonville, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

vent grill broken at installation screw

old vent off screwed new in less than a minute

Parts Used:

Vent Grille

Tim from Palm Harbor, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

The vent grill was broken

I remove the old broken Grill Vent by loosing two screws and just put the new one and adjusted with the same two screws.

Parts Used:

Vent Grille

Norma G. from Poinciana, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

The top vent grill tabs broke rendering it unusable

I simply removed the original 2 screws for the old grill, attached the new grill, fastened it with the original screws & It fit perfectly in less than 5 minutes time.

Parts Used:

Vent Grille

James from Anoka, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Lightbulb burned out

Removed one screw lowered glass cover removed burned out bulb replaced with new one put glass back reinstalled screw. Dune 5 minutes back in business

Parts Used:

Light Bulb - 40W

Roland R from NORTH ANDOVER, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Vent grill wouldn't stay on. The clips broke.

Take out the screws, broken pieces of clip, then put in the new vent grill, replace the screws. Done!

Parts Used:

Vent Grille

Julia from Baltimore, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Old part broken

Replaced vent with 2 screws. Very easy.

Parts Used:

Vent Grille

Steve from Foley, MN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Vent Grille broke

I place the vent in the opening, put the screws in place, tightened the screws and viola.

Parts Used:

Vent Grille

Rodney from Midland, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

broken

put the turntable in and had a Rum and Coke to celebrate. Your service was GREATTTTTT...

Parts Used:

Glass Cooking Tray

Donald from Pompano Beach, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Vent Grille Cracked and broke at top screws attached area.

Fitted the grille in place and tightened the screws to hold in place.

Parts Used:

Vent Grille

Mary Jean from Elkridge, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Foreclosed home: parts were missing

Having the correct model number helps:
Just place the parts in the microwave and it worked.

Parts Used:

Microwave Turn Ring

Glass Cooking Tray

OLIV from OAKLEY, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Microwave had no electrical

I was sent the wrong fuse by you. I had to procure a fuse in another manner. Very disappointing. The repair was simple. It just took longer because of the failure to send the correct fuse.

Parts Used: