All Installation Instructions for Hotpoint Dryer HTDX100ED4WW

Replace knob

No brainer

Parts Used:

Timer Knob

Dave from DOUGLAS, WY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The old dryer knob broke

I took off the old dryer knob and put on the new one

Parts Used:

Timer Knob

Charlie from KILGORE, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Timer was stripped

Just placed it where it belonged.

Parts Used:

Timer Knob

Mary Ann from Buzzards Bay, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door handle broke

Called my son-in-law. Easy as pie

Parts Used:

Door Handle - White

Cheryl from WILDER, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

BELT SQUEAKING

TOOK OFF TOP AND FRONT PANEL REACHED IN UNDER TUBE AND REMOVED FROM BELT TENSIONER HARDEST PART IS PUTTING BACK ON TENSIONER TAKES TWO HANDS LAYING ON YOUR BELLY

Parts Used:

Drive Belt

Al from CORP CHRISTI, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Switch not working.

Open the door and removed the part. Installed the new part and started the dryer.

Parts Used:

Door Switch

Alan from BELFORD, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My lint filter had a big hole in it. My dryer is 10+ years old.

All I had to do was remove the damaged filter and replace it with te new one. It could not ave been easier.

Parts Used:

Lint Filter - White Frame

JUDITH from FRUITA, CO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Old lint filter had deteriorated

Removed old one, inserted new one in slot. Just have to be sure it's turned in the right direction.

Parts Used:

Lint Filter - White Frame

Doug from INMAN, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Plastic tab broke on handle --- temp taped on.

My daughter, who has the dryer in Florida, made the repair herself. She removed the broken handle that had been temporarily taped in place. Cleaned off tape residue with Goo-Gone. Then took the new handle and snapped it into place. Worked just like it was supposed to.

Parts Used:

Door Handle - White

Jay from Niceville, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Black marks showing up on garments.

Once I figured out how to remove the control panel. The rest was very easy. Upon pulling off the knob in the center of the control panel, there was a screw behind it. Once removed I used the palm of my hand and gave it a couple of upward hits in the center while the door was open. It slid up and I removed the electrical connections. Then carefully removed the top by pushing from the rear of the machine slightly and lifted off. Then removing the screws that hold the front on . After that it went pretty easily, reassembly went in reverse and. That was that!

Parts Used:

Dryer Bearing Slide (2 Pack)

Duct Felt Seal

Garry from CONNELL, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bad dryer motor

Replaced dryer motor which was a perfect fit thanks to your help. The process was helped by the internet videos available for the step by step procedure of taking the dryer apart and replacing the bad motor. I also was able to completely clean the inside of the dryer thoroughly, and reassemble it back together .

Parts Used:

Drive Motor and Pulley

Darryl from FARR WEST, UT
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

was not heating cheak parts select they recomended to purchaged the thermostat check vidio for installetion now working fine thanks

watched vidio from the site.just follow the instructions, And was able to fixed the problem.

Parts Used:

Cycling Thermostat - 4 Wire

Francisco from WEST COVINA, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Cracked air duct

Two screws under the dryer door then the top comes off.Then two screws hold the front on come out. 4 screws top is off and front is off the rest is no problem.

Parts Used: