HR5212C Makita Hammer - Parts

Genuine Manufacturer Sourced replacement part used on a variety of Makita Power Tools. This is a Metal Pan-Head Screw and it is sold individually. This screws is commonly used to hold two pieces of Housing Set together.

This is an authentic replacement part manufactured for use with Makita demolition hammers. The power cord is used to supply the demo hammer with electricity. This cord is a two wire cord and is available as an individual replacement part, please note the cord protector is available separately.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Makita power tools. It is an identical replacement for a missing or a damaged screw that was installed on a new unit. This is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagrams of y...Read moreour model for the correct location and application of this part. Keep in mind this high-quality tapping screw is made of durable metal and is sold individually.

This is a genuine Makita replacement part that has been sourced from the original manufacturer to be used with rotary hammers. The tool retainer fits inside the chuck cover near the tool holder. The tool retainers are used to secure the bits to the holder. This item is sold as an individual replacement part, please note two retainers may be needed.

This authentic OEM part is compatible with various handheld power tools made by Makita including jig saws, routers, and sanders. A bearings main purpose is to decrease friction between moving parts. They also stabilize parts to keep proper direction and angle. Bearings are high wear items that may need regular replacement. Sold individually. Included in part number 517266-0 Armature Assembly 115V

This authentic replacement part which is specially designed for use with Makita power tools. Ball bearings are used to reduce friction between rotating parts, over time components may begin to wear out and fail eventually requiring a replacement. Please note this high-quality ball bearing is made of durable metal and it is sold individually.

This authentic replacement part is specially designed for use with Makita power tools. Ball bearings are generally utilized to reduce the friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over time the com...Read moreponents may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made of durable metal and is sold individually.

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are: • Extrusion and Nibbling O-rin...Read moreg has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. • Over Compression O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

It is a genuine manufacturer-sourced which is specially designed for Makita power tools. Power cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point, right where the cord enters the tool. Unfortunately, over time the material will wear out and may begin to fail eventually requiring...Read more a replacement. Keep in mind this high-quality item is made of durable rubber and is sold individually.