This front rack support helps stabilize and securely position a rack within the appliance. Its sturdy design ensures proper alignment and safe support during loading and unloading.
This microwave line fuse is a genuine replacement part designed to protect your appliance from power surges and overheating. It helps restore power when a blown fuse prevents the microwave from turnin...
Keep your microwave safe with this door interlock switch. It stops the microwave from running when the door is open, protecting you from accidental exposure. If your microwave won’t start or acts up, ...
This black metal tray helps your microwave heat food evenly by rotating during cooking. It fits on rollers and sits on the coupler inside the microwave, turning smoothly to make sure everything gets h...
Keep your microwave working like new with this easy-to-install turntable coupler. It links the motor to the glass tray so your food rotates evenly for better cooking. If your tray wobbles or doesn’t t...
This waveguide cover protects the interior of the microwave by shielding key components from food splatter and moisture. Made from durable mica material, it helps prevent sparking and keeps the applia...
This microwave door hinge helps your appliance open and close smoothly while keeping the door sealed tight. It’s an important part that makes sure the microwave only runs when the door is shut, keepin...
The left door interlock support keeps the microwave’s door switch properly aligned so the appliance can detect when the door is fully closed and operate safely. If the switch becomes loose or misalign...
This support is a replacement structural component designed to hold or stabilize internal assemblies during operation. It helps maintain alignment and durability and is commonly replaced when bent, cr...
This hinge helps your microwave door open and close smoothly and safely. It’s made for the left side and is built to last, but if your door is hard to open, won’t stay closed, or makes strange noises,...
$143.05
In Stock
Questions And Answers for HMC87151UC
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
June 22, 2023
Sparks coming from turntable wheels occassionaly. Has electric smell afterwards
For model number HMC87151UC
Hello David, thank you for your inquiry. Sometimes the wheel shaft starts to rub and can cause metallic edges, which the microwave will react to. You will need to just replace that bottom tray. It is part number PS10061150. We hope this sorts out your problem!
Replaced the wave cover. Unscrewed existing cover that is at the top inside the microwave. Screwed in the new cover. Took about 30 seconds to do. Bosch service wanted over $100 for a service call plus parts and labor. Did it myself in seconds for under $10.
Thermal switch on top of Magnetron was defective, spade contacts were burned and loose. New switch $6 +shipping. Removed top cover held on with several Philips head screws. Plugged unit in and gave it 30 seconds to test the fan was working, it was. Put 500ml water in cavity, ran it for 60 seconds, which after fiddling with wires it did, and got over 20C temp rise so magnetron was working (detailed instructions online). Switch is right on top of magnetron. Tried to remove spade lugs but lugs pulled out of switch so I cut the lugs off and removed the broken switch. Screwed down new switch using old hardware. Trimmed wires back and cleaned them. Used crimping tool to put on new spade lugs from car parts store. put heat shrink over lugs and wires to strain relief and buttoned the unit up. Microwave works fine and oven baked a cake so good repair.
