This lid lock, also known as a door lock, is a genuine OEM replacement part for your washing machine. The lid lock keeps your washer lid closed during the washing cycle. If this part is broken, your w...
Ask our experts a question about this model and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
August 23, 2021
Can you tell me how to add fabric softener with this machine? Thanks
For model number GTW220ACK6WW
Hello Linda, Thank you for your inquiry. For this model, you would pour the diluted fabric softener directly into the tub water during the rinse cycle. You can also have a fabric soften dispenser cap added. Hope this helps.
Hello Dasie, thank you for getting in touch. It appears that your washer may have a damaged lid lock assembly, part number PS16554755. You may need to replace the lid lock assembly to fix this issue. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Maxine
April 4, 2023
Do the suspension rod come in set of 4
For model number GTW220ACK6WW
Hello Maxine, Thank you for the question. The suspension rods are sold individually based on left and right side. We hope this helps!
Was this helpful?
Thank you for voting!
Kathryn
December 22, 2023
Washer fills and drains. But
Doesn't wash or spin.
What's the problem?
For model number GTW220ACK6WW
Hi Kathryn, thank you for your question! Check if the lid is properly closed. Some washing machines have a safety feature that prevents them from spinning if the lid is open. Make sure the drive belt is fine. If all checks are fine, you may need to replace the motor, part number PS12743595. We hope that helps!
Was this helpful?
Thank you for voting!
Debra
February 5, 2024
I need the whole locking
For model number GTW220ACK6WW
Hi Debra, thank you for the question. According to our research, the lid lock service kit for your model is part number PS16554755. Glad to be of help!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Drain all the water out of the tub with a shop vac Remove rear drain hose and drained rest of water into a bucket Remove small rear panel (bottom left hand corner) where the drain hose connects Tipped washer up about 45 degrees to get underneath it - Supported it with a few paint cans Remove internal drain hose/clamps from pump - w/ pliers Remove belt cover (gray plastic) with socket - 3 bolts Remove wire assembly plug from socket Remove old drain pump with socket - 3 bolts Install new drain pump - 3 bolts - plug wire assembly into socket Reinstall belt cover - 3 bolts Reinstall hose to drain pump (note panel will be inside washer) Feed drain hose panel through hole and reinstall - 1 nut Re attached drain hose to exterior drain plug You are done !
Very simple to repair. Be sure to drain the tub outside or into the sump pump then lay the washer on its side. The pump is right there on the bottom of the basket with 3 bolts. You will also need to remove the belt cover to get to the plug. So simple and saves you hundreds off repair man prices.