GTS18UBPARBB General Electric Refrigerator - Instructions

All Instructions for the GTS18UBPARBB
61 - 75 of 75

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
broking slide
  • Anthony from Painter, VA
  • Easy
  • 15 - 30 mins
replace the bar lift top off
Was this helpful?
Thank you for voting!
a lot of ice in the freezer-and in the refrigerator is warm
  • STOYAN from ARLINGTON HEIGHTS, IL
  • Really Easy
  • 30 - 60 mins
HI I am Stoyan. I had a problem with my refrigerator. The freezer produces a lot of ice, but the refrigerator was warm. I try to find what other people comment on this site partselect.com. I decided that the thermostat is damaged. I ordered the thermostat from partselect.com and I had the delivery within 24 h. and I was very happy with t he fast delivery service .I saw a video on the same site how they show how to do myself the change of the thermostat. I took the hairdryer from my wife to defrost the refrigerator for 40 minutes and removed the old thermostat. I decided to test the heater with a 9 volts electricity from a portable charger for a car. I made an electric circuit chain and on the end of the heater I saw that there was 9 volts electricity and I understood they are ok. I changed the thermostat for 5 minutes, looking very carefully to match the colors of the cables. For $ 11, I saved money to buy a new refrigerator or pay a big bill to a repair service. Thank you for the video that helped me very much. My refrigerator work well.
Was this helpful?
Thank you for voting!
install second set pan sliders
  • William from Rockville, MD
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Because the kit did not include fasteners, had to use wood screws and superglue.
Was this helpful?
Thank you for voting!
Refrigerator section too warm
  • Ken from Chapel Hill, NC
  • Easy
  • 1- 2 hours
  • Socket set
I followed advice from other posts on this web site. The only thing additional I'd recommend is to take pictures of assemblies before you disassemble them. A neighbor gave me that useful tip. It should be noted that I first noticed my refrigerator failure back on June 22, 2012. I hired a reputable local repair service to fix it. They replaced the Defrost heater (item 618) and charged me $ 208.14. Then on August 22nd, I noticed that the problem resurfaced. I decided to fix it myself using info from site. The repair went well, and I'm hopeful that it will stay repaired. Kudos to this site!
Was this helpful?
Thank you for voting!
refrig.not cooling.freezer ok.
  • Leroy Neal from Andrews, SC
  • Really Easy
  • 30 - 60 mins
removed freezer panel,found the evap.iced up,put defrost timer into defrost. wated five min.no heat used hair dryer to defrost evap.found termination visually defective.replace defective part.no call back.Iam a EPA certified universal technician.
Was this helpful?
Thank you for voting!
light switch quit working
  • David from Simpsonville, SC
  • Easy
  • Less than 15 mins
  • Screw drivers
removed the inside fridge electrical panel and swapped switches
Was this helpful?
Thank you for voting!
The Pan ASM Veg. were cracked and broken.
  • J Nathan from Arlington, TN
  • Really Easy
  • Less than 15 mins
I just ordered 2 new PAN ASM VEG and replaced the cracked and broken ones. Now my refrigerator looks new again.
Was this helpful?
Thank you for voting!
sticky switch
  • ANTHONY from NEW EGYPT, NJ
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
easy pry out, disconnect wiring, connect on new switch and press in switch.
Was this helpful?
Thank you for voting!
failed light switch
  • Jules from Crowley, LA
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I started removing the switch by prying on the right side with a screwdriver, when it emerged enough I used pliers to finish removing it. I then unpluged rhe wires from the bad switch and pluged them on the new switch and "poped" it into the hole.
Was this helpful?
Thank you for voting!
no light in freezer
  • christopher from collegeville, PA
  • Really Easy
  • Less than 15 mins
Connected the 2 wires and pushed in the switch until it clicked.
Was this helpful?
Thank you for voting!
Broken Snack Pan Slide
  • Raymond from San Marcos, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers
2 screws. how easy can i get.
Was this helpful?
Thank you for voting!
switch wouldn't come out anymore and turn light on
  • Cynthia from Seatac, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Gently pry out switch in door jam with screwdriver and pull both connectors off and put connectors on new switch then push switch back into the hole. Looked it up on the internet and video showed how to and also had link to new part, ordered and less than a week later the fridge is bright again. I have an older freezer also and it seems that they all use the same switches. Very Very easy
Was this helpful?
Thank you for voting!
Noisy evap fan motor
  • Anthony from District Heights, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Simply unplug fridge, remove air duct mounted on rear panel, release panel itself, pull fan blade off, disconnect grounding wire, detach fan motor bracket, disconnect wire harness to release fan motor, install new fan motor and reconnect, secure with bracket, reconnect grounding wire, reposition fan blade onto motor shaft, reinstall rear panel and secure screws. Remount air duct and plug appliance back in. This is the second motor that was replaced since 2002. The 1st motor dies after 5-6 years.
Was this helpful?
Thank you for voting!
Gasket was not staying in place; worn and broken from sticking.
  • Jeff from South Berwick, ME
  • Really Easy
  • Less than 15 mins
Pulled the old gasket off, approximately 5 seconds. Put the new one in, starting from the corners, with no tools, approximately 2 minutes. Coated gasket with a thin film of petroleum jelly, approx. 1 minute.
Was this helpful?
Thank you for voting!
Plastic slide for snack pan right side cracked/broke
  • Penny from Gilbert, AZ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Only took a screwdriver to take two screws out & install new slide with the two existing screws. Very easy. Took less than 5 minutes. Great website I found on Google right away, just by searching for refridgerator parts. After ordering part, only took a few days to come in.
Was this helpful?
Thank you for voting!
All Instructions for the GTS18UBPARBB
61 - 75 of 75