Models > GTD42GAMJ1WW > Instructions

GTD42GAMJ1WW General Electric Dryer - Instructions

All Instructions for the GTD42GAMJ1WW
46 - 48 of 48
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace light bulb in drum.
Unplug dryer, unscrew bulb then replace with a new bulb. Plug dryer back in.
Parts Used:
Light Bulb
  • Scott from Pascagoula, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Blown bulb
Replaced bulb.
Parts Used:
Light Bulb
  • Carlos from Saint Albans, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dryer wouldnt stay heated
Took off the top cover then took off the front panel and installed the new coils on gas valve.
Parts Used:
Heat Detector
  • Ron from Parkersburg, WV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GTD42GAMJ1WW
46 - 48 of 48
Back to Top