GSS25KSWCSS General Electric Refrigerator - Parts

The lid bumper or evaporator fan motor bumper in your refrigerator prevents the fan motor from scraping against the side bracket. If your refrigerator/freezer is noisy, the bumper could be worn down or missing, and the sound could be a result of the motor scraping the side bracket. You will find it between the fan motor and the side brack...Read moreet on the evaporator fan motor assembly. To access the bumper, you will need to remove the evaporator fan motor assembly from the freezer. This part is made of orange rubber and is less than half an inch in diameter. It has a rounded top and a slightly pointed bottom, and is sold individually.

This part releases water from the supply line when it's activated.

This kit includes damper, fan assembly, nozzle and gasket for nozzle. The damper and fan has been updated by the manufacturer to avoid freezing in the refrigerator. Also known as a damper assembly.

The shelf stop in your refrigerator is what locks the shelf into the refrigerator liner. The shelf stop can be found attached to the shelf. To remove the shelf stop, begin pulling the shelf out until the stop hits the refrigerator liner, then depress the shelf stop to remove the shelf. With the shelf removed, you can simply slide the old ...Read morestop out of its groove, and replace it with a new one. This part is made of white plastic and is about 1 inch in length. It is sold individually, and is an OEM part sourced directly from the manufacturer.

This evaporator fan blade is for your refrigerator, and it circulates air so that the temperature of the fridge is regulated. This model has 3 blades, and is a little more than 4 inches in diameter. It is made of white plastic and is sold individually. If your refrigerator is noisy and you hear a clicking sound, it is a good indication th...Read moreat the evaporator fan blade is warped or damaged. If the fridge or freezer sections become too warm, the fan could be to blame as well.

If your refrigerator shelf is cracked, missing, or no longer holding up to daily use, this replacement glass shelf offers a simple solution to restore your fridge’s organization. Designed to fit select refrigerator models, it provides a secure and reliable surface for storing food and beverages. The clear glass construction allows for eas...Read morey visibility and a clean, modern look. Installation is quick and hassle-free—just slide it into place using the existing shelf supports.

This refrigerator cover top pan assembly, also known as a crisper cover, is a genuine OEM replacement part for your fridge. This crisper cover consists of the frame, and glass panel. It serves as the top cover of your crisper drawer. Customers have rated this repair as being easy.

This part is a replacement pan cover gasket for your refrigerator. You will find the pan cover gasket on the meat pan, and it helps to seal the pan. If the pan cover gasket is lost or damaged, it will not be able to create the seal and will need to be replaced. The gasket is approximately 15 inches wide and is white in color. It is an OEM part from the manufacturer and is sold individually.

Sold individually.

Coarse thread

This part holds the ice once it's released from the icemaker. When activated, the auger rotates and pushes ice out of the bin through the chute to the user.

When your refrigerator starts accumulating frost or struggles to maintain temperature, the defrost thermostat might need replacing. This small but essential part helps control the defrost cycle, preventing ice buildup and keeping your appliance running efficiently. Installing a new thermostat can quickly resolve defrosting issues and rest...Read moreore normal operation. Always confirm your model number to ensure the part fits your specific refrigerator.