GSM1800F00BB General Electric Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Delayed start. Then would not start
Disconnect electric. Take the top 6-8 screws. The top front section will come off. Disconnected the four wires, two white, two black. Remember the order. Remove the two screws holding the striker. Take out the old part. Place new part in opening behind the handle. Reconnect screws and wires. Replace the top section replace screws reconnect power.
Parts Used:
-
Charles from Addison, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dishwasher basket worn our and utensils slipped through bottom
1. open dishwasher, 2. roll out bottom dish rack, 3. remove old silverware basket, 4 place new basket in same spot old basket was in, 5. roll bottom dish rack back into dishwasher, 6. close dishwasher door.
Parts Used:
-
EUGENE from CENTEREACH, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Faulty Latch
8 screws.4 to take off the faceplate on the d/w control panel and 4 to remove the faulty latch assembly. Reverse to put it back on.Works like a charm. However, this is the 2nd replacement of this part in about 2 years. I think moisture gets into the assembly and shorts the switch.
Parts Used:
-
John from Woburn, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!