1. Home
  2. GSC6012S
  3. Instructions

GSC6012S (MWEGSC) LG Range - Instructions

All Instructions for the GSC6012S
16 - 19 of 19

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave failed to head and light, fan, and turntable failed to come on.
1 of 2 people found this instruction helpful.
  • Robert from Cedar Park, TX
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws.
Was this helpful?
Thank you for voting!
Items were not getting heated up in the microwave,
1 of 2 people found this instruction helpful.
  • Kenneth from CRYSTAL LAKE, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Easy, and the microwave still doesn't work.
Was this helpful?
Thank you for voting!
Shaft socket was worn out
0 of 1 people found this instruction helpful.
  • Cesar from Miami, FL
  • Really Easy
  • Less than 15 mins
Pop old one out and replaced it with new one.
Was this helpful?
Thank you for voting!
House wiring failure caused excessive voltage to microwave
  • Douglas from Missoula, MT
  • A Bit Difficult
  • More than 2 hours
  • Screw drivers
Disassembled control panel and checked power transformer windings. Primary winding fried. Patched power to magnatron transformer to make sure it was ok. Removed power transformer and checked diodes and transistors on board which were ok. Installed new transformer and reassembled control panel to microwave. Checked functions.
Was this helpful?
Thank you for voting!
All Instructions for the GSC6012S
16 - 19 of 19