Models > GSC3500D35WW > Instructions

GSC3500D35WW General Electric Dishwasher - Instructions

All Instructions for the GSC3500D35WW
121 - 135 of 200
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Your part was perfect and easy to pick
Starting removing the screws based on the Users guide document - was surprised to find 4 different types of screws and driver heads - Luckicly I am an adult male and have every tool -

the surprise were the Star screws - the phillips head and soctket screw were one thing -

Everything went well.
Parts Used:
Long Front Panel - White
  • Lee from Centennial, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Several
There is nothing to tell I order send to location and their maintenance installs
Parts Used:
Dishwasher Rack Slide End Cap
  • Charlene from Nashville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher pump was frozen
Ordered pump mechanism and replaced defective pump. A very easy replacement
Parts Used:
Pump and Motor Assembly
  • George from Loving, NM
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheels colapsed
replaced new wheels
Parts Used:
Lower Rack Wheel Kit - 8 Pack
  • Nick from Chatham, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the top part of the dishwasher down to bottom
first i see if i could move the metal piece it wouldn't move si i used a flat head screw drive to fix it . the end piece was to long so i cut a piece off it fitting it is not moving
Parts Used:
Dishwasher Rack Slide End Cap
  • Tracy from Rockland, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The original lower dishwasher dishrack on this portable dishwasher was so shoddy that the rubber coating on it eroded so that the metal underneath rusted and caused rust spots on the dishes and other parts of the dishrack also rusted completely through and broke off. The door on this dishwasher has
I opened the dishwasher, rolled out the defective/rusty Dishrack, removed it from the dishwasher and replaced it with the new Lower Dishwasher Dishrack.

Before attempting this repair, remember to remove any dishes from the lower Dishwasher Dishrack.
Parts Used:
LOWER RACK
  • Bonnie from Wilmington, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Discovered that the end caps were broken
Removed the broken items and clicked the new ones in place utilizing a pliers
Parts Used:
Dishwasher Rack Slide End Cap
  • Timothy from Chatham, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The end cap broke off so when we would pull out the upper rack the whell would fall off of the track.
The end cap snapped into place perfectly without any problems and the rack works like new again. This is the second time I have used PartSelect.com and I am very satisfied with how fast I recieve the product and the easy of finding what I need. I would recommend them to anyone!
Parts Used:
Dishwasher Rack Slide End Cap
  • Christina from Claremore, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
4 wheels missing from diswasher rack (lower)
removed the rack and snapped the 4 week/axle assemblies on rack by hand pressure returned rack to track.
Parts Used:
Lower Rack Wheel Kit - 8 Pack
  • Richard from Oak Hill, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
End Cap Broken
Removal of the old end cap required pliers. Not too difficult. The new end cap simply snapped into place. Both end caps on the two rack slides replaced in less than five minutes.
Parts Used:
Dishwasher Rack Slide End Cap
  • Daniel from Odenton, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rack end cap was lost or missing
All I had to do was slide the rack forward slightly, reach back to the end of the rack and snap the end cap into place. It helped to have someone there to balance the rack while I was replacing the cap.
Parts Used:
Dishwasher Rack Slide End Cap
  • Jennifer from Silver Spring, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rack slide end cap broke.
I put the new cap in. POC.
Parts Used:
Dishwasher Rack Slide End Cap
  • David from Broomfield, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom basket of dishwasher kept following out
i needed new rollers and inserts to keep wheels on now its like new when i pull out bottom basket
Parts Used:
Lower Rack Wheel Kit - 8 Pack
  • stephen from mashpee, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel was distorted
Simply replace wheel
Parts Used:
Lower Rack Wheel Kit - 8 Pack
  • R. Cecil from Norfolk, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rack kept coming off slider due to broken end
Popped in the part
Parts Used:
Dishwasher Rack Slide End Cap
  • Joyc e L. from Prosser, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GSC3500D35WW
121 - 135 of 200