- Home
- GRL258SVKA
- Instructions
GRL258SVKA (AWBCLGA) LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
mounting tabs broken off
-
Brent from Cordele, GA
- Really Easy
- Less than 15 mins
slightly depressed tabs, lined up to mounting holes, released tabs.
Was this helpful?
Thank you for voting!
Lamp cover and case had melted
-
Donna from Abilene, TX
- Easy
- Less than 15 mins
-
Screw drivers
I removed the old lamp cover and case. Discovered that the last repair person had not re installed it correctly so the case had melted from the bulbs. I Removed the screws that was supposed to hold it up, assembled the case and cover, inserted the screws and anchored them in where they belong. Problem solved!
Other Parts Used:
Was this helpful?
Thank you for voting!
Crisper Drawer Fronts Broken at Hinges
-
Frances D. from Oxford, OH
- Easy
- 15 - 30 mins
No installation instructions. I just took everything out of the shelf holding the drawers and figured it out myself. Unfortunately today's products are made with cheap brittle plastic. This is the second time I have ordered parts for this refrigerator from you and I am glad you are so efficient and shipped orders quickly.
Was this helpful?
Thank you for voting!
The LH top door latch broke.
-
Mike from Cedar Falls, IA
- Easy
- 15 - 30 mins
-
Screw drivers
At first, ordered only a latch only to discover the mounting strip had instead failed. Ordering parts wasn't difficult although the parts catalog graphic leaves a lot to desire. Once I figured out how to remove the strip (had to remove the seal first and no instructions existed), it was easy to snap out the old and snap in the new part. T
... Read more
his sure beat the cost of paying a repairman. However I fear than most homeowners that aren't mechanically inclined wouldnt have been successful because of no instructions and the parts catalog that had poor detail and a very small size.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Lights Stayed on Melted Light cover
-
Walter from Vero Beach, FL
- Easy
- 15 - 30 mins
-
Screw drivers
Replaces door switches - removed screw from door hinge cover, lifted cover and removed switch. Plugged in new switch and reversed process. Removed screws from light bracket. Attached new frame to slots in roof and used screws to attach. Clipped on light cover.
Other Parts Used:
Was this helpful?
Thank you for voting!
icemaker quit working
-
William from Bridge City, TX
- Easy
- 30 - 60 mins
My husband took out the ice maker. We ordered the part. He looked on YouTube for instructions. Including looking up instructions, I think it took him way less than an hour.
Was this helpful?
Thank you for voting!