- Home
- GR-L288NVJP
- Instructions
GR-L288NVJP LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
replace leaking water inlet valve assembly
42 of 75 people
found this instruction helpful.
-
Richard from JACKSONVILLE, FL
- Really Easy
- 15 - 30 mins
-
Screw drivers
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new
... Read more
water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Read less
Was this helpful?
Thank you for voting!
Very bad noise which stopped when the door was opened
15 of 20 people
found this instruction helpful.
-
Rick from CLEVELAND, TN
- Easy
- 30 - 60 mins
-
Screw drivers
The Refrigerator now runs very quite.
After watching several videos I started on mine and found that it was a bit different than any in the videos. However all but the back panel was shown and that was helpful.
The back panel was a bit difficult but a hair dryer seemed to help .
All in all it was a good choice to do it myse ... Read more lf as it was done quicker than waiting on a repair man.
After watching several videos I started on mine and found that it was a bit different than any in the videos. However all but the back panel was shown and that was helpful.
The back panel was a bit difficult but a hair dryer seemed to help .
All in all it was a good choice to do it myse ... Read more lf as it was done quicker than waiting on a repair man.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Ice maker stopped working
10 of 12 people
found this instruction helpful.
-
Linda from BEAVERCREEK, OH
- Really Easy
- Less than 15 mins
Replace the ice container. There was a break in one of the things that held it in.
Was this helpful?
Thank you for voting!
Replace water filter
4 of 6 people
found this instruction helpful.
-
Bill from FORT SMITH, AR
- Very Easy
- Less than 15 mins
Followed directions that came with the filter. Did remove the top shelf for easier access. Very simple and quick.
Was this helpful?
Thank you for voting!
Blower motor out on condenser
4 of 7 people
found this instruction helpful.
-
George from WHITE BIRD, ID
- Easy
- 30 - 60 mins
-
Screw drivers
followed detailed movie from Utube video
Was this helpful?
Thank you for voting!
Low water pressure which in turn led to no water and no ice.
7 of 16 people
found this instruction helpful.
-
Daniel from ABERDEEN, WA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers, Wrench set
Unplugged fridge, shut off water supply disconnected water supply from fridge. Remove screws that hold lower cover on back of fridge, removed screws holding valve assembly to fridge. Disconnect two electrical connections, remove black c-clip on out flow water line, lift fitting on outflow line side and pull water line off. Replace with va
... Read more
lve assembly in reverse order
Read less
Was this helpful?
Thank you for voting!
Leaking
2 of 3 people
found this instruction helpful.
-
Johnny from MOUNT OLIVE, AL
- Really Easy
- 30 - 60 mins
-
Screw drivers
Swapped old one with new one. New one had extra plug not needed.
Was this helpful?
Thank you for voting!
Slow water for drinking
2 of 4 people
found this instruction helpful.
-
Steven from SEBASTIAN, FL
- Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
Just like on YouTube very easy to do
Was this helpful?
Thank you for voting!
Ice Maker and Water dispenser stopped working
2 of 4 people
found this instruction helpful.
-
Donald from BETHPAGE, NY
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Pulled the fridge out.
Unscrewed the back cover and the one screw holding the value assemble.
undid the 2 hoses and replaced the part.
Super SImple/
Unscrewed the back cover and the one screw holding the value assemble.
undid the 2 hoses and replaced the part.
Super SImple/
Was this helpful?
Thank you for voting!
Lower ice maker water feed froze and caused leak. Needed new water valve.
2 of 5 people
found this instruction helpful.
-
Thomas from YORKTOWN, VA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Took pics of original install, removed old valve, water tubes & plugs. Installed new valve, reconnected electronic plugs, water tubes, turned water back on and all has been well since. Thank you for your timely delivery!
Was this helpful?
Thank you for voting!
Valve assembly leaked
2 of 6 people
found this instruction helpful.
-
Richard from TORRANCE, CA
- Very Difficult
- More than 2 hours
The assembly sent is different than what is on the unit. The connectors do not match. We called and it seems you don’t have the correct part. The only part we have found will only connect the ice maker or the water. It will be a shame if I have to buy a new refrigerator.
Was this helpful?
Thank you for voting!
My dishwasher was leaking water
0 of 2 people
found this instruction helpful.
-
rosalie from wayne, NJ
- Really Easy
- 15 - 30 mins
The repair went well. They actually had to replace the motor. This saved me a lot of money having it repaired in this manner. Very professional & pleasant.
Was this helpful?
Thank you for voting!