GR-L21AVSP LG Refrigerator - Instructions

All Instructions for the GR-L21AVSP
1 - 15 of 25

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replace leaking water inlet valve assembly
42 of 75 people found this instruction helpful.
  • Richard from JACKSONVILLE, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Was this helpful?
Thank you for voting!
Door flap spring
12 of 23 people found this instruction helpful.
  • Claudio from YONKERS, NY
  • Really Easy
  • Less than 15 mins
  • Pliers
Insert the top first and then twist to insert bottom
Was this helpful?
Thank you for voting!
old one broke
9 of 17 people found this instruction helpful.
  • Ron from MAXWELL, IN
  • Easy
  • 30 - 60 mins
  • Screw drivers
Sent for replacement,got it took old one off put new one on that was it. Thank you
Was this helpful?
Thank you for voting!
ICE MAKER STOP WORKING AND MAKING A LOT OF NOISE WHEN TRYING TO DUMP AND WAS HANGING UP TOOK IT APART AND FOUND THE WORM GEAR WAS STRIPED
4 of 5 people found this instruction helpful.
  • William from DICKINSON, TX
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
EASY PEASEY WATCHED INSTALL VIDEO NO PROBLEMS WORKING GREAT THANK YOU
Was this helpful?
Thank you for voting!
The spring broke
4 of 5 people found this instruction helpful.
  • Steven from YORBA LINDA, CA
  • Very Difficult
  • 30 - 60 mins
I could not as the spring was too large and did not fit. Calls to Parts Select were not very useful as I described the problem and was told that that was the correct part, even though I supplied photos.
Rather than research the problem, I was told to call LG. Not exactly the response I expected from an authorized distributor. By the way, LG service said to call an authorized distributor, so round and round I go Please help.
Was this helpful?
Thank you for voting!
The lights wouldn't always come on.
4 of 6 people found this instruction helpful.
  • Linda from VALE, OR
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I actually watched a YouTube video for LG refrigerators. The hardest part was taking the wire harness out. Mine was really stuck in there. But got it, put the new switch in and viola it worked. Yay!
Was this helpful?
Thank you for voting!
Replace water filter
4 of 6 people found this instruction helpful.
  • Bill from FORT SMITH, AR
  • Very Easy
  • Less than 15 mins
Followed directions that came with the filter. Did remove the top shelf for easier access. Very simple and quick.
Was this helpful?
Thank you for voting!
Ice maker wore out.
3 of 3 people found this instruction helpful.
  • Thomas from LA PLACE, LA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I installed the new 3 wire ice maker very easily, but it was defective. I was told that instructions for the return of the defective part would be sent later due to the virus. I have never received the return instruction.
I did receive a credit for the defective part. VERY Satisfied with y’all’s service.
Waiting for return i nstructions if y’all still want it back.
Thanks,
Thomas Pennebaker
Was this helpful?
Thank you for voting!
Broken Flapper Spring on Door
3 of 3 people found this instruction helpful.
  • Edgar from FLAGSTAFF, AZ
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Initially the wrong spring was sent. The coiled spring must have COUNTERCLOCKWISE wind for this refrigerator door. A spring with a clockwise wind was initially sent. Partselect very promptly and efficiently corrected the problem at their expense. For this reason I give them a strong recommendation.
View their instructions on youtube.
Was this helpful?
Thank you for voting!
Low water pressure which in turn led to no water and no ice.
7 of 16 people found this instruction helpful.
  • Daniel from ABERDEEN, WA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench set
Unplugged fridge, shut off water supply disconnected water supply from fridge. Remove screws that hold lower cover on back of fridge, removed screws holding valve assembly to fridge. Disconnect two electrical connections, remove black c-clip on out flow water line, lift fitting on outflow line side and pull water line off. Replace with va lve assembly in reverse order
Was this helpful?
Thank you for voting!
Ice would not fall
9 of 22 people found this instruction helpful.
  • Bob from Phoenix, AZ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Replaced Ice maker unit
Was this helpful?
Thank you for voting!
Ice maker not making ice, ice tray overfills and cannot dump, ice sticks together and will not dispense
2 of 2 people found this instruction helpful.
  • Bryan from ADA, MI
  • Easy
  • 15 - 30 mins
  • Screw drivers
This repair is pretty straight forward. Just remove the 3 screws that hold the ice maker and bin assembly in, unplug the wire harness connector, then remove it from the refrigerator door. Once removed you simply need to remove 3 more screws that hold the ice maker to the auger/bin frame, remove the temp sensor, and a couple pieces of ta pe. Re-assemble the new ice maker in reverse order and you are all set. I think part of the issue I was having was due to mineral buildup in the tray as well so it had a hard time cracking and removing the ice. Not sure why it was overfilling, maybe the sensor was broken or had buildup on it as well. This solved all the problems I was seeing and now it makes great ice that doesn't stick together and form a bridge in the bin.
Was this helpful?
Thank you for voting!
Broken mullion spring
2 of 2 people found this instruction helpful.
  • Steve from TRENTON, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I watched a couple of You Tube videos on how to make the repair, ordered a new spring from Part Select, and installed the new spring when it arrived. Took about 5 minutes for the actual repair.

Check the spring when it arrives. The first one I received was wound the wrong direction. Called customer service and they were supe r. Refunded the charge for the first spring, found the correct one for me, and mailed it out.
Was this helpful?
Thank you for voting!
Leaking
2 of 3 people found this instruction helpful.
  • Johnny from MOUNT OLIVE, AL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Swapped old one with new one. New one had extra plug not needed.
Was this helpful?
Thank you for voting!
Broken flapper spring in kenmore elite refrigerator door
2 of 3 people found this instruction helpful.
  • Sam from SAINT JOSEPH, MO
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Watched tube video about the repair
Ordered part
Performed repair as per the video
Was this helpful?
Thank you for voting!
All Instructions for the GR-L21AVSP
1 - 15 of 25