GMR06AAPCBB General Electric Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Refrigerator would not come on
I removed the one screw holding cover in place contained the thermostat . Next , I removed the thermostat from the plastic housing. NO screws, it just clippped in. I replaced the old with the new and reinstalled the cover. 2 minutes max. Sears said the part was obsolete but Partselect had what I needed.
Parts Used:
-
SHawn from El Campo, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
11 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old handle broken
Took out 5 screws replaced handle, replaced screws. Pressed hinge cover over hinge. Easy!
Parts Used:
-
Ira from Dallas, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!