GHDT158V00ES General Electric Dishwasher - Instructions

My husband took off all the wheels and changed the axles. We had friends who had the same problem and they led us to your web site.

Very easy! Removed 4 screws that was holding the valve to the bracket. Placed bracket over water inlet line. Attached copper threaded coupling with pliers.Screwed valved on to the coupling. Attached bracket to the valve with 4 screws. Reattached water line. Attached bracket to frame of dishwaser. Put kickplate back on and done!

pop of the old, pop on the new! Wife happy, Priceless

The parts came really fast, I did not even have time to think about them...when they came I was like what? They are here? WOW! anyway, I just changed the wheels with the new axel and perfect! now it works wonderful...and it was so easy! I can't believe I dealt with that for as long as I did.

took out broken wheel axel and replaced it with a new one

I removed what few remaining wheel assemblies there were - just pulled them off - no tools needed. Then I assembled the new wheels and wheel axels and simply snapped them on to the lower rack! It was a piece of cake.

Replacement parts were better than original thanks

Replaced all 8 of the wheels and axles (the old axles wouldn't hold the wheels in place any longer). Replaced the tub gasket because of cuts from knives. Both fixes were relatively easy to do, although directions for the tub gasket would have been nice!

I replaced the wheels and axels with the ones I bought and now it is fine.

Rolled rack out-took a wheel off, put new one on without any tools. Then did the other five. This was easiest repair job in years

poor engineering design of lower basket wheel attachment. With time the c-clips designed to attach wheels to basket axles lost their 'torque-grip' strength allowing the wheels to fall off into the bottom of the dishwasher and melt against the drying element. The replacement clips for the wheels have a very different design and attach to the basket axles in a manner that makes it almost impossible to come off without forcing/breaking them off. I don't know what the name of the new design is, but my hat's off to the engineer(s) who developed it. Amazing how something so simple can make life so much easier. WBB

Fixed in no time, parts arrived in a day!

We had a missing wheel (probably melted in the dishwasher) and a broken wheel for about 6 months. Everyone in the house argued about who had to load/unload the dishwasher because the bottom rack would not move properly and was a hassle. I ordered 8 replacement wheels and axles and they arrived super fast. I was able to fix the problem in less than 10 minutes. I love my dishwasher again!! Yay!!

Very annoying problem with wheels falling off of the bottom dishwasher rack. Thanks to good advice here, purchased wheels AND wheel axels. Axels snap into the wheels, and the wheels snap on the bottom rack. Wheels are wider that the originals, and these snap ons are a much better design. Rack rolls in and out better than brand new!!

Removed broken wheels & clips from the lower rack. Easily replaced the clips and wheels with the new clips & wheels which are better built then original. The dishwasher now operates better then in its new state because the bottom rack sits higher and the bottom arm swings more efficiently and the dishes are coming out cleaner.