All Installation Instructions for General Electric Dishwasher GHDA960K00WW

leaky dishwasher

remove water connection; shut off circuit breaker ; follow the suplied directions; reassemble washer . job done - leak gone. Wife happy.

Parts Used:

Impeller and Seal Kit

kenneth from ocean isle beach, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

5 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Front door on Dishwasher Leaking

Ordered a new tub gasket and, although the gasket went on backorder for two weeks, the repair itself was extremely easy requiring no tools at all!

Parts Used:

Tub Gasket

Rick from Jacksonville, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

missing cap

I placed the missing cap into the dispenser.

Parts Used:

Rinse Aid Cap

Jean from White Plains, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

The soap dispenser would not close.

This was simple. I took the door apart with a portable screw driver. Then I detached the wires and unscrewed the old module and replaced it. I then put the door back together, loaded the dishwasher and it cleaned my dishes. Even for this `old dog' it was easy.

Parts Used:

Detergent Dispenser with Rinse Cap

tim from prior lake, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

pieces that attach the wheels to the lower rack kept falling off

Ordered the new parts and attached to wheels on lower rack. The old pieces clamped on and the plastic stretched out and would not hold any longer. The 8 new pieces have a slightly different design, were easy to intall and I believe will never loosen up.

Parts Used:

Single Lower Wheel Stud/Axle

Laverne from Roselle, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Leaking from front

I removed the old gasket very easily as there wasn't even glue holding it in place. The new gasket just pressed right into a slot and makes a water tight seal.

Parts Used:

Tub Gasket

David from North Charleston, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Broken middle spray arm

Unscrewed the screw holding it in place and removed it, out the new one in place and screwed it on. Very quick and simple.

Parts Used:

Middle Spray Arm

Pamela from Bakersfield, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Plastic part of inlet valve cracked

Hired my neighbor, who is a plumber.

Parts Used:

Water Inlet Valve

Barbara from Georgetown, CO
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Plastic hinge arm link broke

Squeeze the new link to the cable hook with pliers while locking the vise grip to the cable for easier handling. Then, using the vise grip on the cable, hook the other end of the link to the dishwasher door hook

Parts Used:

Hinge Arm Link

Eric from EAST MEADOW, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Leaked front right side

Followed the instructions that came with the my order

Parts Used:

Tub Gasket

robert from HAYMARKET, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

leg fell off of bottom rack.

Slid it in. Very easy and the replacement part is built better than the original part.

Parts Used:

Complete Lower Service Rack Assembly

Jonni from VACAVILLE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

basket for silverware was broken

opened the box , new one was an exact fit, pulled out the old one and dropped the new one in place??, this is more of a review, the new part was the exact same one...perfect!

Parts Used:

Silverware Basket with Lids

Mary from Sykesville, MD
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Rollers and axles were worn out

Removed the stops at the end of the upper rack, removed the old rollers. Replaced with new rollers and installed the stops back in place. Very easy, finished in less than 15 minutes. Replacement rollers very much improved with design from the original rollers.

Parts Used: